User Manual

Discrete 8 Pro Synergy Core User Manual
Page 86
SAFETY NOTES
To reduce the risk of electrical shocks, fire, and related hazards:
● Do not remove screws, cover, or cabinet. There are no user serviceable parts
inside.
Refer servicing to qualified service personnel.
● Do not expose this device to rain, moisture or spillover of liquid of any kind.
● Should any form of liquid or a foreign object enter the device, do not use it.
Switch off the device and then unplug it from the power source. Do not operate
the device again until the foreign object is removed, or the liquid has completely
dried and its residues fully cleaned up.
● Do not handle the power cables with wet hands!
● Make sure the device is switched off when plugging/unplugging it to/from the
power source.
● Avoid placing things on the cabinet or using the device in a narrow and poorly
ventilated place which could affect its operation or the operation of other closely
located components.
● If anything goes wrong, turn off the device first and then unplug the power. Do
not attempt to repair the device yourself. Consult authorized service personnel or
your dealer instead.
● Do not install near any heat sources such as radiators, stoves, or other apparatus
(including amplifiers) that produce heat.
● Do not use harsh chemicals to clean your unit. Clean only with specialized
cleaners for electronics equipment.
● Connect all your devices before powering your unit.
● This unit is connected via its power cord to the mains safety earth.
● Never operate the unit without this earth connection.
● DC power supply cable should be routed so that it is not likely to be walked on or
squeezed by items placed upon or against it.