User Manual

4. Installation Guide

Connect to the DC power source via rear panel connector.

Windows:

1. Connect the USB cable to the USB port on your computer.

2. Download and install the Orion Studio software control panel and drivers from www.

antelopeaudio.com/en/support/downloads This will enable you to control your device

from your computer and select all necessary settings.

3. Open your control panel by double clicking and follow the device activation procedure.

4. Connect your choice of inputs and outputs to Orion Studio.

5. The guest operating system will recognize the new output audio device (Orion Studio).

6. If you want to use the Orion Studio through USB for playback and recording, open your

preferred DAW and make sure the device is selected as an input and output..

Note: Make sure your device has the most recent rmware installed.

Mac OS:

Important Note

A Mac is compatible with Orion Studio only if it has the Thunderbolt

logo.

X Mini Display Port Thunderbolt

Port

1. Connect the Thunderbolt

cable to the Thunderbolt

port on your computer.

2. Download and install the Orion Studio software control panel and Thunderbolt

driver

from www.antelopeaudio.com/en/support/downloads This will enable you to control your

device from your computer and select all necessary settings.

3. Open your control panel by double clicking and follow the device activation procedure.

4. Connect your choice of inputs and outputs to Orion Studio.

5. The guest operating system will recognize the new output audio device (Orion Studio).

6. If you want to use Orion Studio through Thunderbolt

for playback and recording, open

your preferred DAW and make sure the device is selected as an input and output.

Note: Make sure your device has the most recent rmware installed. Check this by

selecting the Options panel and clicking on the Firmware Update button. See picture: