User Manual
10
7. Functional buttons
By pressing the top and middle Function buttons you can cycle thru the display and view
various information
Βy holding down the Top Function button you can access the System Menu of the
device, which allows you to access the following sub-menus and conrm them by
pressing the rotary control:
1. Comm. Interface (allows you to choose between Thunderbolt
TM
and USB connectivity)
2. Device Info : Displays the serial number of the device, the hardware revision and the
rmware version
3. Scr Save Time : Sets the time that the screen saver will appear on the Orion Studio
display.
4. Scr Save Style: Changes the style of the screen saver.
5. Talk Back HP1 : Sets weather the talk back mic will be outputted by the Headphones
1 output.
6. Talk Back HP2 : Sets weather the talk back mic will be outputted by the Headphones
1 output.
7. Talk Back MON : Sets weather the talk back mic will be outputted by the monitor outs.
8. Factory Reset: Performs a factory reset on the unit. Please note that by doing so all
presets, mixer and fx settings will be lost.
To scroll up and down, use the Rotary Control.
To enter each one of the sub-menus, press the Rotary Control.
To conrm a chosen setting, press and hold the Rotary Control.
Hold down the second Function button to access the Control Menu of the device, which
allows you to adjust:
1. Clock Source: Sets the clocking source for the Orion Studio
2. Sample Rate: Changes the sample rate of the Orion Studio
3. SR Conversion: Sets weather or not the the S/PDIF input is sample rate converted to
match the sample rate of the Orion Studio internal clock (eg. If you want the clock to run
at 192 kHz and your S/PDIF input is at 44.1 kHz, simply press this button to match the
sample rate frequency of the Orion Studio internal clock).
4. Peak Meter: Selects what is being displayed on the Meter screen of the Orion Studio
5. Monitor Trim: Sets the trim levels for the monitor outs
6. Line Out Trim: Sets the trim levels for the line outs
7. Brightness: Sets the brightness for the units display Screen
To scroll up and down, use the Rotary Control.
To enter each one of the sub-menus, press the Rotary Control.
To conrm a chosen setting, press and hold the Rotary Control.
8. Headphone outputs
Two independently assignable headphone outputs, selectable and controllable via the
main volume control knob.
The lights next to the outputs are illuminated to indicate which headphone output is
currently controlled.
9. Re-amp outputs
These outputs are direct outputs that should be used with guitar ampliers for re-amping.