Owner’s Manual 1
Contents 1. Safety Notes 5 2. Introduction 6 3. Features 7 4. Installation Guide 8 5. Front Panel Explained 9 6. Rear Panel Explained 10 7. Software Control Panel 12 8. Advanced User Tips 15 8.1. Ground Loop Hum and Noise 15 9. Additional Information 15 10. In The Box 15 11. Technical Specifications 15 12.
1. Safety Notes To reduce the risk of electrical shocks, fire, and related hazards: ●● Do not remove screws, cover, or cabinet. There are no user serviceable parts inside. Refer servicing to qualified service personnel. ●● Do not expose this device to rain, moisture or spillover of liquid of any kind. ●● Should any form of liquid or a foreign object enter the device, do not use it. Switch off the device and then unplug it from the power source.
2. Introduction Thank you for purchasing the Satori from Antelope Audio. Studio quality and functionality in a sleek 1Unit rack Satori is a digitally controlled, true analog monitoring and summing system designed for today’s studios. Antelope Orion32 and Zen Studio interfaces have both been praised for their digital clarity, while maintaining the realism of analog sound. Satori features the same high level of uncompromising sound quality thanks to advanced analog circuit design.
3.
4. Installation Guide 1. Connect to the AC power source via rear panel connector (9) and switch the device on (1), then attach the USB cable to the USB port on your computer. 2. Download and install the Satori software control panel from http://www.antelopeaudio. com/en/support/downloads - This will enable you to control your device from your computer and select all necessary settings. 3. Open your control panel by double clicking and follow the device activation procedure. 4.
5. Front Panel Explained 1. Power button Toggles standby/operation state. 2. Input Select buttons channels 1-8 Input select allows you to switch between your desired input source, which will be fed to your selected monitor output. 3. Sum Select button The sum select button allows you to send your stereo sum to your selected monitor output. 4. Rotary control Large stepped relay attenuator for headphone volume and main monitor outputs.
7. Monitor Select buttons 1-4 These allow you to be able to select between the four monitor outputs. Whatever source is selected will be fed to the selected monitor out. 8. Headphone Outputs Two independently assignable headphone outputs (HP1 & HP2) selectable and controllable via the main volume control knob. Front panel LEDs: 8a and 8b indicate which headphone output has been selected by clicking the Rotary control (4). 6. Rear Panel Explained 9.
13. 4 x Main Stereo Monitor Outputs Four assignable balanced stereo outputs, one over XLR, three over TRS 14. Stereo Sum Output The stereo sum output takes the summing input channels 5-8 and creates a stereo signal output over TRS. 15. Talkback Mic Input The talkback input allows you to connect a dynamic mic for a further talkback option utilising your preferred choice of mic. 16. Balanced LFE Outputs LFE stands for Low Frequency Effect.
7. Software Control Panel 1. Standby button 2. Sum Output Fader 3. Input Select 1-8 & Sum 4. Input Trim Offset (-6dB to +6dB in 1dB steps) 5. Main Monitor Volume 6. Output Trim Offset (-6dB to +6dB in 1dB steps) 7. Monitor Select 8.
9. 4 x Headphone Volume dials 10. 4 x Headphone Source dropdown menus 11. 4 x Headphone Mute buttons 12. 4 x Talkback activate buttons 13. Peak Meter 14. Presets 1-5 15. Talkback Indicator Light 16. Talkback Volume Fader 17.Talkback Source Select 18. Mono, Dim, Mute, High Pass Filter 19.
In Standby, the software control panel confirms if the device is connected. 8. Advanced User Tips 8.1. Ground Loop Hum and Noise The design of Satori minimizes the possibility of ground loop hum and noise. However, we recommend the use of shorter, shielded cables and balanced connections for all the audio signals of your system. All power cables of the system should be connected to a dedicated outlet box or power conditioner unit to avoid ground current noise affecting the audio signal path.
11. Technical Specifications Inputs: Analog Inputs: 4 x Stereo Line Level Inputs. Ch1 on XLR & Ch2-4 on TRS 4 x Stereo Line Level Inputs on D-Sub 25 1 x Talkback Mic Preamp on TRS Analog Outputs: 4 x Stereo Line Level Outputs on D-Sub 25 4 x Stereo Monitor Outputs, Mon1 on XLR and Mon2-4 on TRS 1 x Line Level Stereo Sum Output on TRS 1 x LFE Output on TRS 4 x Headphone Outputs (two on the rear and two on the front) on TRS USB I/O: USB 2.
www.antelopeaudio.com/en/support/help-desk Please note that the device registration you did for Satori currently does not automatically transfer to our ticketing system and you have to register again on this webpage. Live Chat Connect with a customer support agent directly via the website: http://www.antelopeaudio.com/en/support Click on Antelope Tab on the right-hand side of the webpage Hours of Operation: 7:00 a.m. - 3:00 p.m.
Version 1.0 / 21.11.