User Manual

1
9
7. Replacing a fuse
If the power light is not illuminated and the Voltikus is plugged into a working AC power outlet with
the power switch in the on position, the fuse may need to be replaced.
1. Disconnect the power cord from the electrical outlet.
2. Insert a fl at blade screwdriver into the notch (8) at the bottom edge of the fuse holder (7)
to release it.
3. Remove the fuses from the fuse holder. Replace them with 0.8A, 250VAC, 5 mm x 20
mm, Type T (Time Lag).
4. Re-insert the fuse holder into its position in the rear panel. Press the fuse holder gently
until it clicks into place.