SAFETY NOTES To reduce the risk of electrical shocks, fire, and related hazards: Do not remove screws, cover, or cabinet. There are no user serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this device to rain, moisture or spillover of liquid of any kind. Do not insert foreign objects into the ventilation outlets of the cabinet. Should any form of liquid or a foreign object enter the device, do not use it. Switch off the device and then unplug it from the power source.
CONTENTS Introduction ................................................................................... Product Overview .......................................................................... Front Panel .................................................................................... Rear Panel ..................................................................................... Wiring Diagram ..............................................................................
Introduction Thank you for purchasing this 10M Rubidium Atomic Clock the foremost device in the Antelope's ISOCHRONE product line specifically designed for the most discerning audio professionals. Before you begin operating this unit, please read the instructions carefully to make sure you handle the device properly and get the best possible performance.
1 2 4 3 5 Front Panel 1. Power Switch When depressed, the device is on, which is signaled by indicators 2 and/or 3 and the Information Display 4 . 2. AC Power Supply Indicator When on, indicates the device is connected to a 90-240 V AC power supply source. 3. DC Power Supply Indicator When on, indicates the device is connected to a 12 V DC power supply source. 4.
7 8 Rear Panel 6. AC Power Connection This IES AC connection supports inputs of 100-240V AC. This enables the device to automatically accommodate mains voltages in any country. 7. DC Power Connection Speakon NL4FX socket for 12 V DC power supply. The power source should be capable of producing enough power to meet the requirements of the device during its peak consumption period (the warm up), when 40 Watts of power are required.
INSTALLATION AND CONNECTION 1. Before placing the device into its operating location, consider the following: The device's ventilation outlets should not be obstructed by other devices and objects and enough space for air circulation should be provided. The device should not be placed next to any heat-sensitive piece of equipment. (The surface of ISOCHRONE 10M may reach a temperature of 55°C (140°F) during operation.
100-240V AC ~ 50/60Hz 7 (unload) , 11 lb.
