User Manual

6. Front, Rear and Side Panels Explained

6.1. Front Panel Explained

1. 2 Reamp outs

These outputs are direct outputs that should be used with guitar ampliﬁers for reamping.

2. 4 Instrument/ Mic Preamp/ Line Inputs

4 Class A mic preamps, with phantom power over Combo input with switchable line/ Hi-Z input.

3. Talkback Button

Press the talkback button to activate the talkback microphone. This can be distributed to the

selected headphones and/or monitors using the software control panel or the touchscreen.

4. Power button

Toggles standby/operation state. Clicking and holding for two seconds allows you to enter sub-

menu of the device.

• Mic Gain Control (rotary controls adjusts Mic Gain Clock Source)

• Sample Rate

• Volume Knob Control (allows you to select between three different monitoring outputs)

• Screensaver Time (allows you to change the time at which the screensaver becomes active)

• Device Info

• Factory Reset

5. Rotary control

Large stepped attenuator for headphone volume and main out volume. Clicking-in the large

volume control allows you to scroll between three different monitoring options: rear monitor

output; headphone output 1 and headphone output 2.

3 4 5

10 9

6 7 8