User Manual

11
6. Display
Multi-function display that can scroll (using the 2 option buttons (6) to the right) through five
different option screens:
• Peak Meter displaying up to 32 channels at a time that are adjustable from the software
control panel.
• Preferences screen, including:
• Sync – indicates current clock source
• SR – indicates current sample rate
• DAC Vol – displays current volume of the DAC
• HP1 Vol – displays current volume of the Headphone 1 output
• HP2 Vol – displays current volume of the Headphone 2 output
• Three subsequent screens display the current input trim state of each of the 12
preamplifiers. Note: Be aware that there might be a protective film over the display, which
dims the illumination – feel free to remove it.
7. Option buttons
Two option buttons allow you to scroll up and down between five different option screens.
8. Headphone indicator lights
These lights are illuminated to indicate which headphone outputs are active. Note: When both
lights are off, rear monitor output is selected.
9. Headphone outputs
Two independently assignable headphone outputs, selectable and controllable via the main
volume control knob
10. 48V Indicator light
Displays when phantom power is enabled at any of the inputs.