User Manual

15
5. Sample Rate select
Once you select the Clock Source and Sample Rate, this will automatically determine the number
of channels available to you in the Inputs & Outputs Router.
6. Lock light
When your Zen Studio+ is slaved to another clock source i.e. Thudnerbolt/USB, the panel will
lock, displaying a “Pad Lock” symbol to the clock source and you also won’t be able to change the
presets. Presets do not store clock source info or sample rate. This allows you to adjust presets
while the device is receiving clock lock.
7. Devices
This dropdown menu allows you to switch between Antelope Audio devices connected to your
computer or on the same network.
8. Settings
9. Info
10. Minimize & Close
11. PREAMP / ADAT IN / S/PDIF IN Section
12. Headphone (HP 1) volume slider & ‘Mute’ button
13. Headphone (HP 2) volume slider & ‘Mute’ button
14. Talkback button / indicator light & Talkback volume fader
15. ROUTING / MIXER / EFFECTS / METERS Section
16. ‘From’ Section (from Routing tab)
17. ‘To’ Section (from Routing tab)
18. Presets Section
Five different presets are available to save your favorite setups for easy access.
To save a new preset:
• Hold down Ctrl (PC) or Command (MAC) & mouse-click on the preset button (in the software
control panel) or;
• Press Ctrl (PC) or Command (MAC) & press the according number on your keyboard.
You can reset the presets to the factory setting or check device info:
19. Undo/Redo Routing; Save/Load (from Routing tab)
20. Hi-Z, Mic and Line (on first four preamps) modes selectable via dropdown menu (please
ensure your selection from the dropdown menu matches the type of signal being inputted)