User Manual

25
DAW
• What buffer size is your DAW set to?
If it is significantly low i.e. lower than 128 samples in your buffer size, try increasing it. Try
increasing the buffer size from the Zen Studio+ control panel (Windows Only)
• Have you checked the input and output routing is correct in your DAW?
Is the Zen Studio+ device selected in the relevant sound card section of the DAW’s preferences?
• If the Zen Studio+ doesn’t show up in you DAW, first try unplugging and plugging back
the USB/Thunderbolt™ cable, then restarting your Computer and finally re-install the
firmware, drivers and control panel for the Zen Studio+.