Other Content

Outdoor Installation or Installations with Remote Power Access:

For outdoor installation, we recommend using water sealing F connector boots or an outdoor weather

resistant box. Make all the connections to the Distribution Amplifier before plugging it into an electrical outlet.

•

Connect the ‘To AMP’ or ‘Power’ output on the Power Inserter (not included) to the ‘POWER IN/RF OUT’

output on the amp using a piece of 75 Ohm coaxial cable.

• Connect another length of 75 Ohm cable to the ‘TO RECEIVER’ or ‘RF’ output on the Power Inserter to one of

the televsions.

• Connect the antenna coming into the home to the top right output labelled ‘RF IN’.

• Connect cables going to individual televisions to the outputs.

• Terminate any unused outputs with F connector terminators.

• Plug Power Supply into electrical outlet. Check to see if power on amplifier’s LED is illuminated.

WARNING: RISK OF ELECTRICAL SHOCK. DO NOT OPEN THE HOUSING. DO

NOT EXPOSE THE DISTRIBUTION AMPLIFIER TO WATER OR MOISTURE.

16388 Westwoods Business Park, St. Louis, MO 63021