Instruction Manual

Connecting Your External Equipment Chapter 1 
Antex Electronics Corporation Antex StudioCard  1-17
!
The next step in the installation process is to install the Antex
StudioCard drivers and software. Refer to the instructions
beginning on page 18, Installing StudioCard Drivers and
Software.
CAUTION: The XLR outputs of the StudioCard may be
damaged if connected to microphone inputs that
provide phantom power. The StudioCard outputs are
designed to be connected to equipment that accepts
high level sources, not low level microphone inputs!
Severe damage will occur to the StudioCard if
connected to phantom power.