Instruction Manual

 Chapter 3 Adjusting the Antex Mixer Display

Not

You will find that displaying all of the lines results in a rather

large display. The Antex Mixer allows you to display only

what’s important to you.

When a line is not selected and displayed, the function it

represents may not be available to application software.

For example, if the Digital In is not part of the active Mixer

display, you may not be able to record digitally.

Displaying the entire Antex Mixer main screen requires a

display resolution of 1024 x 768 pixels. As some monitors

run only at 640 x 480 or 800 x 600, the default

configuration for the Antex Mixer main screen does not

contain all possible components. When adding

components to the display, if your monitor is not setup to

display 1024 X 768 resolution, some portions of the Mixer

may appear off the screen. Changing your screen

resolution is accomplished via the Widows Control

Panel/Settings/Display/Settings Menu.

A complete description of the Antex Mixer main screen display

and controls is provided in Mixer Controls and Indicators on

page 3-5.