Instruction Manual

 Chapter 3 Selecting the Active Antex Mixer
3-22  Antex StudioCard Copyright © 1997
The volume sliders for the play devices appear in four rows, as
do the meters in the Line Out section. Each row, including
meter, corresponds to a physical output of the StudioCard.
The top row is output 1, the bottom row output 4.
This configuration allows you to control the level of each
playback device independently for each physical output. For
example, the screen capture illustrates the following:
Play 1- left output 1 full volume, right output 1,2 full volume
Play 2- left output 3 full volume, right output 4 full volume
Play 3-left output 1 full volume, right output 2 full volume
Play 4-left output 3 full volume, right output 4 full volume
This example shows the volume sliders in their full on or full off
position; they may also be set at any volume in between.