MODEL:AT-1S
Dear customer: Lifetime Warranty for LUKER turntable. if you have questions, please contact us directly to get the service. Our official email address：lukerdirect@gmail.com Our official Facebook：ATX.
Size 13.8x10x4.6 in/ 350x255x118mm Weight 7.3lb/3.3kg Speaker 2 x 3W Stereo Speaker Playback Speed Support for 33 / 45 / 78 RPM Audio Output LINE OUT/Headset (3.5mm) Stereo RCA Audio Input AUX IN / USB disk / Bluetooth 4.
I. The Playback Function of Vinyl Record Player. 1.Connect the power supply:Connect to the DC adapter to power on 2.Turn On/off:Rotate the power knob. Turn it on from left to right; Turn it off from right to left. 3.Playback Operation:Remove the Phonograph cover→Slide Switches of the arm valve→Lift the lever→Put the phonorecord on the turntable→Move the arm above the phonorecord disc→Pull down the lever. 4.
Ⅲ.USB Input Function 1. Insert the USB disk into the interface,and the USB playback mode will be on after the player reads of "USB mode" In this mode,the audio format (mp3,wav) will be scanned automatically. 2. Switch the songs:Click the power knob three times to play the last song and twice to play the next one. Ⅳ.Vinyl Recording Function 1.Insert the U disk, short press the power button 2s to switch the vinyl playback mode on; 2.
Ⅵ.LINE OUT Function Connect the external speakers with audio cables.You can turn the sound of player itself up and down by adjust the power knob.However,it can’t adjust the the external speakers (The wire accessories are not provided). Ⅶ.Other Operation Tips 1.Earphone and the speaker mode can not work simultaneously. 2.Short press the power Knob to switch among different modes in turn swith a sound noticed.(4modes include successively: Vinyl playback function, AUXIN， USB input function,Bluetooth). Ⅷ.
2.Install the new stylus : (1)Grab the front end of the new stylus and the middle of the cartridge respectively. (2)Align the tail of the new stylus at the position of the cartridge groove(point B in the following diagram),install the tail of the new stylus into the cartridge groove slightly and push in gently. (3)Then press the new stylus into the front of the cartridge then lock it firmly.
CONTACT US Company: ANTEXIN TECHNOLOGY Co.,Ltd. ADD: Fuxingda Industrial Park Factory Building, No.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
