Owner's Manual

13
SPEAKER CONNECTIONS (MRX ONLY)
Using speaker wire, connect the positive (+) connection on the speaker to the positive
(+) binding post on the appropriate amplifier output, and the negative (–) connection
on the speaker to the negative (–) binding post on the same amplifier channel using
cable that is insulated to handle the maximum output of the amplifier. Carefully remove
insulation using a wire stripper.
Do not connect more than one speaker to each amplifier output. Be sure that power is
turned off when connecting or disconnecting anything, and that the speakers are rated
for use with this AVM/MRX.
US models allow banana connectors. If using them, first turn the binding post until it is
closed to allow the plug to be fully inserted.
MRX 720
MRX 1120