Owner's Manual

26
3.6 PREFERENCES / LINE OUTPUT
Here you can set preferences as listed.
FRONT PANEL BRIGHTNESS
Set preferred default brightness.
FRONT PANEL WAKE-UP
When a button is pressed the display can go to a brighter level for 5 seconds – select
None, Up 1 brightness level, Medium, or High. When “None” is selected and the display
is off, the wake-up behaves as Up 1 to indicate that the unit is running.
ON-SCREEN INFO DISPLAY
When changing volume, input, listening mode, etc, the info that is shown on the front
panel is also shown on-screen for 5 seconds. To disable the on-screen info, turn this
setting Off.
MUTE LEVEL
When Mute is pressed, sound can cut out completely or decrease in volume by the
amount that you set to keep some of it in the background. Select from Silent or -5 to
-30 dB in 5 dB steps.
MAXIMUM VOLUME
These settings allow you to limit the volume setting to avoid damaging equipment
and/or hearing.
POWER-ON VOLUME
The volume will be at these levels when the AVM/MRX is turned on. To power-on at the
last used volume, set the volume preset below -90 to make Last Used appear.
POWER-ON INPUT
The input will be the pre-set one or Last Used when the AVM/MRX is turned on.
Volumes / REC Output
Front Panel Brightness Medium
Front Panel Wake-up Up 1
On-Screen Info Display On
Mute Level Silent
Main Max Volume 0 dB
Zone 2 Max Volume 0 dB
Main Power On Volume -35 dB
Zone 2 Power On Volume -35 dB
Main Power On Input Last Used
Zone 2 Power On Input Last Used
Headphone Mutes Main Pre-Out Yes
Mute Line Out when selecting None
Mute Digital Out when selecting None