Owner's Manual

6.2 USING ARC WITH AN MRX/AVM
In addition to correcting the acoustic response of subs and speakers, ARC also:
Adjusts the left/right balance of the speakers.
Sets the crossover point between the speakers and subwoofer (do not manually change this after running ARC).
Adjusts the subwoofer’s level relative to the speakers.
Adjusts the subwoofer’s phase/polarity relative to the speakers.
Before using Anthem Room Correction:
Enable subwoofers (if applicable).
Measure and set distance (can be down afterwards as well)
To use Anthem Room Correction:
Download and install the program from AnthemARC.com (the beta version is required for x40 MRX/AVM units)
Start the program and select Launch ARC from the first screen.
Select the MRX or AVM from the device discovery screen.
Follow the on-screen instructions to measure the room, calculate correction curves, and upload them to the MRX or
AVM.
•
•
•
•
•
•
1.
2.
3.
4.