Owner's Manual

7.13 CHROMECAST SETUP
Wired Connection
Connect an ethernet cable to the Receiver/Processor.
Wired & Wireless Connection
Download and open the Google Home app.
You should be prompted that there is a device available for setup. If not, simply tap “Add” followed by “Setup a
Device.” Select the Receiver/Processor and follow the instructions on screen.
To listen to cast audio from any supported application on your Receiver/Processor, ensure your device is connected
to the same network as the Receiver/Processor.
Tap the Chromecast built-in icon from within the application and select the Receiver/Processor as the playback
device.
Bluetooth Setup
Bluetooth connection requires both wireless antennas to be attached. Once the antennas are attached, you must be
on the Bluetooth input for the MRX/AVM to enter Bluetooth pairing mode. Note that when you switch off of the
Bluetooth input or change inputs, the MRX will lose the pairing. The unpairing happens because Bluetooth was
designed for individual speakers and if it automatically reconnects to the receiver, it can switch your input and play
unwanted audio from something like background audio on a website that may be too loud.
1.
2.
3.