Owner's Manual

2.0 INTRODUCTION
2.1 IN-USE NOTICES
Disconnect the power cord before connecting or disconnecting any components.
If the MRX/AVM was transported or stored in the cold, let it reach room temperature before use.
Due to continuing advances, operational characteristics may change. If this manual contains discrepancies, please
check www.AnthemAV.com for the latest manual or software.
2.2 DEFAULT INPUTS
Source Audio Input Video Input
HDMI 1 HDMI HDMI 1
HDMI 2 HDMI HDMI 2
HDMI 3 HDMI HDMI 3
HDMI 4 HDMI HDMI 4
HDMI 5 HDMI HDMI 5
HDMI 6 HDMI HDMI 6
HDMI 7 HDMI HDMI 7
eARC HDMI eARC None
Streaming Streaming None
Bluetooth Bluetooth None
Optical 1 Optical 1 None
Coax 1 Coax 1 None
Analog 1 Analog 1 None
The unit comes programmed from the factory with thirteen (fourteen on AVM) inputs, but you may change this to
create up to 30 inputs. MRX/AVM uses virtual inputs that give you complete control of the name of each input you
create, along with which video (HDMI) input to use, which audio input (HDMI, digital, analog or streaming) to use,
which speaker profile to use, and much more. You can even create multiple inputs for the same source device. For
example, a Blu-ray input configured for 7.1.4-channels and another Blu-ray input configured for 2-channels (and no
subwoofer). For information on setting up inputs, refer to the Setup section of this manual.
•
•
•