Specifications

33
7. ADVANCED SET-UP
The SETUP MENU enables you to access the basic and advanced settings for the AVM 2. In other words,
this is where all the user definable operating characteristics / calibrations / customized configurations are
entered.
You can only gain access to the Setup Menu with the ZONE / PATH set to MAIN.
For optimum performance and enjoyment, it is crucial that your AVM 2 be properly set up.
For ease of viewing, use of the On-Screen display is strongly recommended whether accessing the Setup
Menu from the Remote Control or Front Panel. Both the On-Screen and Front Panel displays are synchro n i z e d .
Please note that parts of the Setup Menu contain more lines than the On-Screen display can show on one
screen – use Remote Control 65 keys (Front Panel ‘Down’ / ‘Up’ ) to scroll through them.
Illustrations throughout this section show the On-Screen display menus. The Front Panel LCD display of the
AVM 2 has similar information fields.
The factory default is set to Composite Video because it is the most commonly available video input. To
use S-Video for your On-Screen display instead, temporarily connect the AVM 2 to your TV Monitor’s
Composite Video input, or use the AVM 2 Front Panel display to enter the Setup Menu. Navigate to
DISPLAYS/SELECTION TIME. It allows you to change the On-Screen Output (see section 7.4.9).
Note: Component Video connections to your TV Monitor do not provide an On-Screen display. You must
then have an additional Composite or S-Video connection to your TV Monitor (and switch your TV
Monitor inputs) or use the Front Panel display to configure the Setup Menu of the AVM 2.
On the Front Panel refer to the italicized labeling above or below the keys. Note: The On-Screen menu line
that is highlighted in red on your TV screen is the one that is currently active.
7.1 HOW TO ENTER THE SETUP MENU from:
• Remote Control: Press and hold the Setup Menu (SUB/LFE) key for 3 seconds.
• Front Panel: Press and hold the STATUS/‘Setup Menu’ button for 3 seconds.
7.2 HOW TO NAVIGATE AND MAKE CHANGES TO SETUP MENU ITEMS from:
• Remote Control: Use the 56 keys to scroll through menus.
Press S E L E C T to choose a menu item.
Use the 56and 34keys to to change the settings within the menu item.
Press EXIT to return to previous item or menu.
• Front Panel: Press ‘Up’ and ‘Down’ to scroll through menus.
Press ‘ S e l e c t ’ to choose a menu item.
Rotate the MASTER CONTROL KNOB t o
change the settings within the menu item.
Press ‘Back’ to return to previous item or
menu.
7.3 HOW TO EXIT THE SETUP MENU from:
• Remote Control: Press EXIT repeatedly to get to ‘Setup Menu’, then press EXIT once more to exit.
• Front Panel: P ress ‘Back’ repeatedly to get to ‘Setup Menu’, then press ‘Back’ once more to exit.