Specifications

39
7. ADVANCED SET-UP continued …
(menu 3.g) TV Size For EQ :
This is used to determine the magnitude of the Center EQ change. The sizes provided offer an easy-to-use
general guideline. Since room/TV/furniture acoustics vary, you may wish to experiment to determine which
setting is actually the best for you. Do the following listening test and determine which sounds the clearest:
when listening to the center channel dialogue of 2 to 3 different DVD soundtracks. (In some situations,
leaving the Center EQ off completely may sound better. Let your ears be the final judge!)
• Select the TV size category that is one higher than what you are using, and then listen. (The size
categories are: 18” - 30” / 30”- 42” / 42”- 54” / 54”- 66” / 66”- 78”.)
• Repeat, dropping one size category at a time.
• Leave the size setting in the category that provides the clearest dialogue, regardless of whether or
not the size actually matches your TV.
(menu 3.h) Hphone Mute Spk:
This determines whether or not the MAIN speakers turn off when a Headphone plug is inserted:
• ‘Yes’ Will mute the MAIN speakers (only). The Front Panel LCD display will then read “HPHONE”
instead of “MAIN” to indicate that adjusting Volume, Bass, Treble, and Balance will aff e c t
HE A D P H O N E only – MAIN settings remain unaffected while headphones are insert e d .
• ‘No’ MAIN speakers will continue to play when headphones are inserted. (To make headphone
adjustments see sections 5.6 to 5.9.1.)
SPEAKER CONFIGURATION Example #1: Change CENTER to ‘Large’.
• Enter the Setup Menu (section 7.1). Go to ‘4. SPEAKER CONFIGURATION’ and press SELECT (‘Select’).
• Press the 6 (‘Down’) key until you reach “c. CENTER: Small”.
• Use the 34 keys (MASTER CONTROL KNOB) to change to ‘Large’. (Note: This change will only be
possible whenever L/R FRONTS are set to ‘Large’ and L/R SURROUNDS are set to ‘None’ or ‘Large’
(see configuration chart on page 38).
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’ ) key to leave the submenu and return to the Setup Menu.
SPEAKER CONFIGURATION Example #2: Change HPHONE MUTE SPK to ‘Yes’.
• Enter the Setup Menu (section 7.1). Go to ‘3. SPEAKER CONFIGURATION’ and press SELECT (‘Select’).
• Press the 6 (‘Down’) key until you reach “h. HPHONE MUTE SPK: No”.
• Use the 34 keys (MASTER CONTROL KNOB) to change to ‘Yes’.
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’) key to leave the submenu and return to the Setup Menu.