Specifications

51
7. ADVANCED SET-UP continued …
SAVE / RESTORE Example #2: ‘RESTORE INSTALLER SETTINGS’.
Note: FM/AM Tuner presets that were saved in INSTALLER SETTINGS will also be restored.
• Enter the Setup Menu (section 7.1). Go to ‘10. SAVE/RESTORE SETTINGS’ and press SELECT (‘Select’).
• Press the 6 (‘Down’) key until you reach “d. RESTORE INSTALLER SET’NS”.
• Press SELECT (‘Select’). You will be asked to confirm that you want to restore installer settings.
• Use the 34 keys (MASTER CONTROL KNOB) to change to ‘Yes’ and press SELECT (‘Select’).
On-Screen display message will then say ‘Saving Successful’, the Front Panel display says ‘Done!’.
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’ ) key to leave the submenu and return to the Setup Menu.
SAVE / RESTORE Example #3: ‘RELOAD FACTORY DEFAULTS’.
Note: The current time, FM/AM Tuner presets, and surround effect settings (section 5.10) will be
retained. Individual speaker level, balance, and bass/treble adjustments (sections 5.6, 5.7, and
5.9) will be reset to 0 dB.
• Enter the Setup Menu (section 7.1). Go to ‘10. SAVE/RESTORE SETTINGS’ and press SELECT (‘Select’).
• Press the 6 (‘Down’) key until you reach “e. RELOAD FACTORY DEFAULTS”.
• Press SELECT (‘Select’). You will be asked to confirm that you want to ‘reload factory settings’.
• Use the 34 keys (MASTER CONTROL KNOB) to change to ‘Yes’ and press SELECT (‘Select’).
On-Screen display message will then say ‘Saving Successful’, the Front Panel display says ‘Done!’.
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’) key to leave the submenu and return to the Setup Menu.
7.4.11 LOCKOUT / PASSWORDS
Passwords can be used to protect the Saved User and Installer settings. Once you have set a password, it
can also be used as a Lockout to prevent all Setup Menu settings from being changed by anyone other than
those who have Passwords.
(menu 11.a) Set Setup Menu Lockout:
You must enter a User or Installer Password before the Lockout feature can be used. When set to ‘Yes’ this
prevents anyone without a Password from entering the Setup Menu. When you attempt to enter the Setup
Menu, you will be asked for your Password – either the USER or INSTALLER Password must then be entered
before you will be allowed to continue.
11. LOCKOUT/PASSWORDS
a. SET SETUP MENU LOCKOUT
b. SET USER PASSWORD
c. SET INSTALLER PASSWORD