Specifications

52
7. ADVANCED SET-UP continued …
(menu 11.b-c) Set User or Installer Password:
When setting the USER or INSTALLER Password, you will be asked to enter a four digit number. Pick one that
you will be able to easily remember. To enter that number use the 1 – 6 keys on the Remote Control or the
1 – 6 FM/AM Preset buttons on the Front Panel. You can also change an existing password by first entering
the old one, and then entering (and confirming) a new one.
LOCKOUT/PASSWORDS Example #1: ‘SET USER PASSWORD’.
• You must first enter USER or INSTALLER Password.
• Enter the Setup Menu (section 7.1). Go to ‘11. LOCKOUT/PASSWORDS’ and press SELECT (‘Select’).
• Press the 6 (‘Down’) key to go to “b. SET USER PASSWORD”.
• Press SELECT (‘Select’). You will be asked to enter a four digit number. Use the 1 – 6 keys to do so.
If you are changing your Password you will be asked to enter your old Password first. You will also
be asked to confirm your new Password (re-enter your new Password).
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’) key to leave the submenu and return to the Setup Menu.
LOCKOUT/PASSWORDS Example #2: ‘SET SETUP MENU LOCKOUT’.
• Enter the Setup Menu (section 7.1). Go to ‘11. LOCKOUT/PASSWORDS’ and press SELECT (‘Select’).
• Upon entering this menu item, “10a. SET SETUP MENU LOCKOUT” will be highlighted in red.
• Press SELECT (‘Select’). You will be asked to enter your Password. Enter either the USER or
INSTALLER Password will work. Use the 1 – 6 keys to do so.
• Use the 34 keys (MASTER CONTROL KNOB) to change to ‘Yes’ or ‘No’.
• Press SELECT (‘Select’) or EXIT (‘Back’).
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’) key to leave the submenu and return to the Setup Menu.
LOCKOUT/PASSWORDS Example #3: ‘CLEARING THE USER PASSWORD’.
• Enter the Setup Menu (section 7.1). Go to ‘11. LOCKOUT/PASSWORDS’ and press SELECT (‘Select’).
• Press the 6 (‘Down’) key to go to “b. SET USER PASSWORD”.
• P ress SELECT (‘Select’). You will be asked to enter your old Password. Use the 1 – 6 keys to do so.
• When asked for your new Password press the 4 (‘Down’) key four times. You will also be asked to
confirm your new Password, press the 4 (‘Down’) key four times again. Message will then say
‘User Password Removed’.
• When finished press 65 (‘Down’ / ‘Up’) to go to another Menu Item, or...
• Press the EXIT (‘ B a c k ’) key to leave the submenu and return to the Setup Menu.