Specifications

Copyright © Paradigm Electronics Inc. All rights reserved. We reserve the right to change specifications and/or features
without notice as design improvements are incorporated. www.anthemAV.com.
Power Output
Continuous 20 Hz to 20 kHz, <1% THD (all models)
Power Requirement
THD at 100 W
at 1 kHz ....................................................................0.0010%
at 20 kHz ...................................................................0.015%
IMD at 100 W
ITU-R (19 kHz + 20 kHz).....................................................0.0005%
SMPTE (60 Hz + 7 kHz) .....................................................0.002%
SNR, IEC-A, ref. 225 W......................................................120 dB
Frequency Response, 20 Hz to 20 kHz
open circuit ................................................................± 0.1 dB
8 Ω.........................................................................± 0.1 dB
4 Ω.........................................................................± 0.1 dB
2 Ω.........................................................................± 0.2 dB
Power Bandwidth, -3 dB at 200 W into 8 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 kHz
Slew Rate ..................................................................30 V/μs
Damping Factor, 20 Hz to 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Channel Separation, 100 Hz to 10 kHz.....................................>65 dB
Input Impedance
RCA / XLR ..................................................................10 kΩ / 15 kΩ
Input Sensitivity, 225 W into 8 Ω...........................................1.5 Vrms
Voltage Gain...............................................................29 dB
This product operates from a single phase AC power source that supplies
108V – 132V at a frequency of 60 Hz for the 120V version and 198V – 264V
at a frequency of 50/60 Hz for the 220V – 240V version.
Dimensions (all models)
Height .................................................................... 6-5/8” (16.9 cm)
Rackmounted Height ..................................................... 4U
Width ..................................................................... 17-1/4” (43.8 cm)
Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1/8” (46 cm)
Weight (unpacked)
MCA 525 (Gen. 2) .......................................................... 61 lb (27.5 kg)
MCA 325 (Gen. 2) .......................................................... 43 lb (19.5 kg)
MCA 225 (Gen. 2) .......................................................... 40 lb (18 kg)
Three MCA 525s (Gen. 2) paired
with an AVM 90 A/V Processor
Create Your
Own Dolby Atmos
15-Channel System
consumption
MCA 525 (Gen. 2)
MCA 325 (Gen. 2)
MCA 225 (Gen. 2)
standby
2.0 W
1.4 W
1.0 W
typical
550 W
350 W
240 W
idle
80 W
47 W
35 W
high output
1200 W
750 W
500 W
load
8 ohms
4 ohms
2 ohms
watts
225 W
400 W
600 W
TECHNICAL SPECS