Owner`s manual

Installation
Unpacking and Inspection
Each Classico CL-1 and its accompanying owners' manual are packaged together in a
single carton. Carefully inspect them immediately after unpacking. If you note any
concerns or shipping damage, please contact your dealer. Do not install or use your CL-1s
if they appear to be damaged.
Additional Items Required for Installation
The following additional items are required when installing your Classico CL-1s and
connecting them to your system:
Item Description
Mounting Hardware A bookshelf or cabinet shelf, a floor stand,
table stand, or a wall mount should be used for
mounting your CL-1s. Some of these can be
obtained from your local AGA dealer.
Connecting Wire AGA recommends high-quality 18-ga. or larger
connecting cables. There are several high-quality
speaker wires available, and you can discuss the
possibilities with your AGA dealer.
Adjustable Wrench A small adjustable wrench should be used to
carefully tighten the speaker connections.
Attaching the Grilles
The Classico Series grilles are held on to the speakers by magnets imbedded in the baffle
itself. Simply place the grilles carefully in position and they will "latch on" to the speakers.
If critical listening is your thing, you'll find a slight improvement in the speaker's imaging
and soundstaging with the grilles removed.
7
6
Figure 3. Example of a Surround Sound (5.1 Configuration) Setup
Classico CLS-10
Subwoofer
Classico CL-1
Loudspeaker
Classico CL-1
Loudspeaker
Classico CL-1
Loudspeaker
Classico CL-C
Loudspeaker
Classico CL-1
Loudspeaker