Owner`s manual

Connecting Your Classico CL-2s

Caution: Failure to turn off the receiver or amplifier and unplug it from the

power outlet before connecting your speakers may cause damage to your

system. You should always turn the receiver or amplifier off before making

or changing any connections.

Connect the positive (+) (red) and negative (-) (black) terminals of each speaker to the

corresponding positive (+) and negative (-) speaker terminals on your receiver or amplifier.

Note: Be sure to maintain proper phasing by connecting the positive terminal on the

amplifier/receiver to the positive terminal on each speaker. DO NOT REVERSE ANY

OF THE CONNECTIONS. If you do, that speaker will be out of phase with the other

speakers, resulting in reduced bass, lack of imaging and harsh midrange sound.

Installation

Unpacking and Inspection

Each Classico CL-2 and its accompanying owners' manual are packaged together in a

single carton. Carefully inspect them immediately after unpacking. If you note any

concerns or shipping damage, please contact your dealer. Do not install or use your CL-2s

if they appear to be damaged.

Additional Items Required for Installation

The following additional items are required when installing your Classico CL-2s and

connecting them to your system:

Item Description

Mounting Hardware A bookshelf or cabinet shelf, a floor stand,

table stand, or a wall mount should be used for

mounting your CL-2s. Some of these can be

obtained from your local AGA dealer.

Connecting Wire AGA recommends high-quality 18-ga. or larger

connecting cables. There are several high-quality

speaker wires available, and you can discuss the

possibilities with your AGA dealer.

Adjustable Wrench A small adjustable wrench should be used to

carefully tighten the speaker connections.

Attaching the Grilles

The Classico Series grilles are held on to the speakers by magnets imbedded in the baffle

itself. Simply place the grilles carefully in position and they will "latch on" to the speakers.

If critical listening is your thing, you'll find a slight improvement in the speaker's imaging

and soundstaging with the grilles removed.