Owner`s manual

Warranty and Extended Service Agreement
AGA speakers are covered by a one-year Limited Warranty against defects in workmanship
and manufacturing. In addition, we offer registered Gallo owners a free four-year
Extended Service Agreement.
In order to qualify for the Extended Service Agreement you must fill out and return the
warranty card or register on our web site: www
.roundsound.com/product-registration.php.
This will establish your ownership and activate the free four-year Extended Service
Agreement for your speakers. When you enter the information, you will need the serial
number of each speaker. The serial numbers are located on the label at the rear of each
speaker.
The one-year warranty is valid for the original purchaser only and is not transferable or
assignable. The Extended Service Agreement is also only valid for the original registered
purchaser.
Statement of Warranty: Anthony Gallo Acoustics Limited Warranty
You must purchase Anthony Gallo Acoustics products from an authorized AGA Dealer,
www
.roundsound.com, or an authorized AGA Distributor in order to qualify for warranty
service and be eligible to receive the four-year Extended Service Agreement. If you
purchased your product from any other source, your product(s) warranty is void and you
are not eligible for the Extended Service Agreement.
Anthony Gallo Acoustics warrants this product to be free from defects in materials and
workmanship under the specified terms stated above. Anthony Gallo Acoustics will, at its
option, repair or replace this product and/or any parts proven to be defective in materials
or manufacture. The original sales invoice must be presented along with the request for
warranty repair by the original owner and the product must be registered with Anthony
Gallo Acoustics in order to verify ownership.
Terms of the Extended Service Agreement are the same as those within this warranty
policy.
13
Classico CL-2 Specifications
Frequency Response 39 Hz – 22 kHz ±3 dB in-room
Impedance 4 Ohms, nominal
Sensitivity 90 dB at 2.83 volts, 1 meter
Power Handling 100 watts undistorted amplifier power
Minimum Suggested Power 15 watts RMS
Tweeter CDT 3 Cylindrical Diaphragm Transducer, 180° dispersion
Woofer One 5.25-inch moving coil polymer damped carbon fiber
Internal Crossover None required
Enclosure Type BLAST Transmission Line using patented
S2 bass loading
Enclosure Composition 3/4-inch internally braced MDF
Finishes Genuine cherry or ash veneers, dark cherry or black ash finish
Connections Custom Gallo 5-way gold-plated binding posts
Dimensions Width: 7.0 in. (17.8 cm)
Height: 13.4 in. (34.0 cm)
Depth: 9.0 in. (22.8 cm)
Weight 12.5 lbs. (5.7 kg)
Warranty - One year parts and labor. Five years if product is registered within 60 days of
purchase and with all documentation.*
* Documentation is necessary for us to determine the purchase authenticity of all AGA
products.
* AGA does not authorize any online reseller of any type to sell our products,
except our own site, www
.roundsound.com. If purchased from an un-authorized
online reseller, there will be no support or warranty service provided for products
purchased.
12