Owner`s manual

7
Surround Positioning: The CL-2 will make an ideal surround speaker in a multi-channel
Classico setup. The primary surrounds are best placed to the sides of the listening area,
approximately two feet above seated ear height and even with or a little behind the
primary listening seats. If the room is long or if there are several rows of seating, more
than one set of surrounds can be placed along the side walls.
If you're installing secondary (rear) surrounds (i.e., a 7.1 system), place the secondary
speakers at the back of the room, approximately 150 degrees from the screen but still
about two feet above seated ear height. For alternate placement recommendations, please
consult your AVR manual or contact your local AGA dealer.
System Examples: An example of a stereo (2.0 configuration) setup using two stand-
mounted Classico CL-2s is shown in Figure 2. A stereo system with a subwoofer
(2.1 configuration) setup using two stand-mounted Classico CL-2s and a Classico
subwoofer is shown in Figure 3. An example of a surround sound with subwoofer
(5.1 configuration) setup using two stand-mounted CL-2s, one table-mounted CL-C center
loudspeaker, two wall mounted CL-2s for the primary surround channels, and a Classico
subwoofer is shown in Figure 4.
6
Figure 3. Example of a Stereo with Subwoofer (2.1 Configuration) Setup
Classico CLS-10
Subwoofer
Figure 4. Example of a Surround Sound (5.1 Configuration) Setup
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CL-2
Loudspeaker
Classico CLS-10
Subwoofer
Classico CL-C
Loudspeaker