O W N E R ' S M A N U A L & TR OU B LE-SH O OTI NG G U I DE Carl's Table : CT12 ® Part Number: CT12SG/MCS Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062 Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.
04 01 05 On Off Fan Carl’s Table On Off Lighting Controls 02 08 CT08 01 09 Fan Auto Back Light Comfort Controls Manual On Height Monitor Height Table Depth 07 Off Light Power Task Lights 03 10 06 Tilt 2 3 4 5 6 7 8 9 Set 0 Go 11 12 WE L C O M E TA B LE O F C ONTENTS Thank you for purchasing Carl’s Table, model CT12! 01 Fan Control This Owner's Manual will show you how to operate the table, how to adjust the settings on Carl's Table, and how to troubleshoot any
CT 1 2 O W N E R S ' M A N U A L A ND TR OU B LE-SH O OTI NG G U I DE Introduction Carl’s Table is designed to provide comfort, privacy, and lighting by making the table very adjustable. Controls located on the upper corners of the keyboard surface adjust the height (28" to 48") and tilt (0 to 15° ) of the table surfaces, the height and depth of the monitors, air movement, and lighting.
CT 1 2 O W N E R S ' M A N U A L A ND TR OU B LE-SH O OTI NG G U I DE Programmable Presets Program your preferred height and tilt positions right into the table! Carl's Table CT12 has 99 programmable presets. The preset display indicates which setting is active. To preset a table position: 1) Move the table to the desired height and tilt position. 2) Enter the two-digit number you want to record. 3) Press and hold down the "SET" button for 5 seconds.
CT 1 2 O W N E R S ' M A N U A L A ND TR OU B LE-SH O OTI NG G U I DE Relocating Carl's Table If you'd like to relocate your Carl's Table, please contact us for assistance! Relocating the table without Anthro or our authorized agent will void the warranty. Installing Your Equipment Only your IT personnel can install your hardware onto Carl's Table. ATTACHING THE KNUCKLES TO THE MONITOR Place your monitor face down on a non-marring surface with the top of the monitor away from you.
CT 1 2 O W N E R S ' M A N U A L A ND TR OU B LE-SH O OTI NG G U I DE TROUBLE-SHOOTING GUIDE Having a little trouble making Carl's Table behave? Try these simple steps. If you're still having trouble, please give us a call and we'll work with you to make it right. The Table Won't Go Down or Tilt If your table won’t go down or tilt, it could be that one of the safety stops has been triggered by contact with an obstacle. When this happens, the Safety Light on the Comfort Control interface will illuminate.
CT 1 2 O W N E R S ' M A N U A L A ND TR OU B LE-SH O OTI NG G U I DE Anthro Corporation Limited Warranty What Does This Warranty Cover? This warranty covers any defects in material or workmanship in the CT12. Who is Covered By This Warranty? This warranty extends to the original consumer of the product only.
Anthro Corporation® | 10450 SW Manhasset Dr. | Tualatin, OR 97062 Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409 *300-5462-00* 300-5462-00 Notices: Technology Furniture, Carl’s Table, and Monitor Control System are trademarks of Anthro Corporation. Anthro reserves the right to modify the design and specifications without prior notice.