Specifications

ManualsBrandsAnthro ManualsTVs & monitorsDisplay Cart

ASSEMBLY INSTRUCTIONS

Anthro Corporation

| 10450 SW Manhasset Dr. | Tualatin, OR 97062

Toll-free: 800.325.3841 | Fax: 800.325.0045 | email: sales@anthro.com | anthro.com

Outside the U.S. | Tel: 503.691.2556 | Fax: 503.691.2409

Anthro Video Conferencing Cart

July, 2011

NOTE: The Camera Mount is not included.

Product Part#

Anthro Video Conferencing Cart DC02SM/BK5

Anthro Video Conferencing Cart w/Cabinet DC01SM/BK5

DC01SM/BK5 DISPLAY CART W/CABINET SM/BK

DC02SM/BK5 DISPLAY CART SM/BK

DCCMBK DISPLAY CART CAMERA MNT ZZ

DCSHSM/BK DISPLAY CART SHELF SM/BK

WELCOME

Thank you for purchasing your An-

thro Video Conferencing Cart! If you

have any questions or if we can help

you in any way, please contact us at

800.325.3841.

*300-5528-00*

300-5528-00

Warranty:

The Anthro Video Conferencing Cart has a Lifetime

Warranty.

Notices:

Technology Furniture is a trademark of Anthro Corporation.

Anthro reserves the right to modify the design and

speciﬁcations without prior notice.

Summary of content (4 pages)

PAGE 1
A s s e mb ly i nstr u c ti ons Anthro Video Conferencing Cart we l c o me Thank you for purchasing your Anthro Video Conferencing Cart! If you have any questions or if we can help you in any way, please contact us at 800.325.3841. Product Part# Anthro Video Conferencing Cart DC02SM/BK5 Anthro Video Conferencing Cart w/Cabinet DC01SM/BK5 NOTE: The Camera Mount is not included. Warranty: The Anthro Video Conferencing Cart has a Lifetime Warranty.
PAGE 2
PARTS LIST Before beginning assembly of your Video Conferencing Cart, please review the parts list to verify that your shipment is complete.
PAGE 3
STEP 2 - c a r t w i t h c a b i n e t Assemble the Cabinet ¡ Using your Phillips screwdriver, install the handle onto the cabinet door. ¡ Using the Anthro driver, remove the four fasteners holding the cabinet's back panel in place. Set aside the fasteners and the panel. ¡ Align one tapped rail with the holes on one of the cabinet's leg channels. Using the Anthro driver, loosely attach one 1/2" bracket screw through the metal flange on the cabinet and into the tapped rail.
PAGE 4
STEP 6 Install the Cart Handles ¡ If you are including an Additional Shelf in this assembly, install it now using its instruction. ¡ Loosely attach two tapped rails to each handle assembly with two 1/2" buttonhead screws using the Anthro driver. Tighten just until the tip of the fastener reaches the outside of the tapped rail. Repeat for the second handle. ¡ Slide each handle assembly onto the cart legs until the top of the handle is 41" above the floor and tighten. Repeat for the second handle.