Assembly Instructions User guide

PARTS LIST
Before beginning assembly of your Elevate II Adjusta,
please review the parts list to verify that your
shipment is complete.
3
Product Quantity Part Number
01 Monitor Surface 1
48w Basic 100-6678-00
48w Plus 101-1112-03-00
60w Basic 100-6676-00
60w Plus 101-1110-03-00
02 Keyboard Surface 1
48w Basic 100-6679-00
48w Plus 101-1113-03-00
60w Basic 100-6677-00
60w Plus 101-1111-03-00
03 Gusset X 1 225-4611-00
04 Gusset Y 1 225-4612-00
05 Electric Leg 2 575-5085-00
06 Motor Housing 2 225-4613-00
07 Cross Pan 1
48w 225-4619-00
60w 225-4615-00
08 Cable Tray 1
48w 225-4638-00
60w 225-4637-00
09 Control Box (not shown) 1 400-0780-00
10 Control Box Cord (not shown) 2 400-5182-00
11 Power Cord (not shown) 1 400-5181-00
12 Key Pad 1 400-5357-00
13 Key Pad Slider 1 400-5358-00
14 Foot 2 835-5581-00
15 Adjusta Mechanism 1
for 48w Table 225-5546-00
for 60w Table 575-5072-00
Product Quantity Part Number
16 1/2" Button-head Screw 7 325-5193-00
17 Nylock Nut 7 325-5186-00
18 M6-20 Cap Screw 8 325-5272-00
19 3/4" Phillips Screw 4 325-5370-00
20 1" Button-head Screw 56 325-5580-00
21 M6x14 Flat-head Screw 4 325-5435-00
22 M6-10 Button-head Screw 4 325-5503-00
23 Wire Mgmt Snap-in Clip 2 175-5188-00
WELCOME
Thank you for purchasing Anthro's Elevate II Adjusta
electric lift table!
If you have any questions or if we can help you in
any way, please contact us at 800.325.3841.
TOOLS
Your Elevate II comes with these tools:
• 5/32" hex Anthro driver
• 5/32" hex driver bit
• 5mm hex key
• 1/8" hex key
• 3-way wrench
To make the assembly even easier, use your own
3/8" socket for Step 4.
HARDWARE LIST
01
02
03
04
05
06
07
08
12
13
14
15