Datasheet

0100001  UK  STATIC SHIELDING BAG  UPDATED | 31 AUGUST 2023 12:27 PM V1
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it
relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but
Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the
products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from
negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
PRODUCT CODE SIZE (In) SIZE(mm) QUANTITY (per pack)
010-0025 8 x 12 203 x 305 100
010-0035 8 x 16 152 x 406 100
010-0022 8 x 20 203 x 508 100
010-0027 8 x 30 203 x 762 100
010-0028 10 x 10 254 x 254 100
010-0029 10 x 12 254 x 305 100
010-0030 10 x 14 254 x 355 100
010-0031 10 x 16 254 x 406 100
010-0034 10 x 24 255 x 600 100
010-0040 12 x 14 305 x 355 100
010-0041 12 x 16 305 x 406 100
010-0042 12 x 18 305 x 457 100
010-0047 14 x 16 356 x 406 100
010-0048 14 x 18 355 x 457 100
010-0097 14 x 24 355 x 610 100
010-0055 16 x 18 406 x 457 100
010-0056 16 x 20 406 x 508 100
010-0058 18 x 18 457 x 457 100
010-0059 18 x 20 457 x 508 100
010-0060
18 x 24 457 x 610 100
010-0096 20 x 24 508 x 610 100
• Other sizes available upon request, minimum order quantities apply
• All of Antistat’s products are RoHS 3 and Reach compliant
• Supports IEC 61340-5-1 and IEC 61340-5-3 also meets ANSI/ESD S20.20, ANSI/ESD S541 and ANSI/ESD S11.4 Level 3
NOTES