Datasheet

TM
ESD & PRODUCTION CONSUMABLES
ESD & PRODUCTION CONSUMABLES
TECHNICAL DATASHEET
0130001  UK  STATIC SHIELD BAGS  GRIP SEAL | 27 MAY 2022 9:47 AM V1
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it
relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but
Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the
products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from
negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
Static Shielding Bag -
Grip Seal
These grip seal, easy access static shielding bags are designed
to protect sensitive electronic devices against ESD during transit
and whilst kept in storage.
PRODUCT
• Metal “Faraday cage” layer shields products
from electric energy inside and prevents static
build-up
• Four layer protection guards against charges
inside and out
• Semi transparent for easy content identification
• Surface resistance of 10 - 10 Ohms
• Conforms to EIA 625, EIA 541, ANSI/ESD S-20.20
and EN61340-5-1 and EN 61340-5-3
• Custom sizes and print at available on request
• Suitable for packaging electronic products
which are sensitive to static, eg PCDs, electronic
components etc.
FEATURES
Our bags are available in custom sizes or in
several industry standard sizes. Bags are oered
in a 2-seal configuration and bottom fold, with our
standard flexographically printed artwork. Please
note any bags that are longer than 24” will have a
3rd seal along the bottom edge. Our bags can also
be personalised with your company logo on any
bespoke orders.
1) CONFIGURATION(S)
2) BAG ARTWORK
Our static shielding bags are produced with the following sample
artwork as standard. For further information on bespoke/printed
orders, please contact one of our sales team. Please note there
is a MOQ of 20,000 bags on all custom printed bags.
TECHNICAL DATASHEET