Datasheet

TM
ESD & PRODUCTION CONSUMABLES
ESD & PRODUCTION CONSUMABLES
TECHNICAL DATASHEET
0160003  UK  BUBBLE SHIELD BAGS | 11 MARCH 2022 4:48 PM V1
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it
relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but
Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the
products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from
negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
Bubbleshield bag
ANT016BSB
The lamination of an ESD, transparent, static shielding
film to an antistatic polyethylene bubble wrap
combines both antistatic and physical protection.
The outer layer is an ESD transparent static shielding
film. This material forms a Faraday cage around the
product, oering superior static shielding protection,
while the inner layer of pink antistatic bubblewrap
gives excellent physical protection.
PRODUCT
• Provides ‘Faraday Cage’ protection against ESD
• Semi transparent finish
• Custom sizes and printing available on request
• This durable product is reusable, protecting
both your product and the environment
FEATURES
CONFIGURATION(S)
Our bags are available in custom sizes or in
several industry standard sizes. Bags are oered
heat sealed along the three edges.
Additional static peel and seal lip available on
request subject to MOQ.
TECHNICAL DATASHEET
NOTES
Supports EN 61340-5-1 and can be used as part of
an ANSI/ESD S20.20 programme.