Datasheet

0180001  UK  MOISTURE BARRIER BAG  3.6MIL V3 | 1 SEPTEMBER 2023 10:51 AM V1
To request a quotation or for more information, please call [phone]
email [e-mail] or visit www.antistat.co.uk
IMPORTANT: This data sheet and its contents (the “Information”) belong to Antistat or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it
relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but
Antistat assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the
products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from
negligence or where Antistat was aware of the possibility of such loss or damage arising) is excluded. © 2021 Antistat.
Moisture Barrier Bag 3.6MIL
TECHNICAL DATASHEET
PRODUCT
• Protects electronics from moisture and
static damage
• Opaque and light tight to oer
additional protection
• Firm lamination and heat sealing oers
superior resistance to vapour and
oxygen ingress
• Surface resistance of 10-10 Ohms
• These bags are ideal for transporting
and storing moisture sensitive devices
such as circuit boards and electronic
components.
• Available in 3.6 / 4.4 and 6Mil
thicknesses
• Flexible structure & easy to vacuum
seal
FEATURES
CONFIGURATION(S)
CONSTRUCTION
The 3.6MIL bag features an antistatic metallized
polyester outer layer and an antistatic inner layer. In
between are layers of static dissipative polyethylene,
nylon and an aluminium foil shield.
Our bags are available in custom sizes or
in several industry standard sizes. Bags are
oered in a 3-seal configuration, with our
standard flexographically printed artwork.
Our bags can also be personalised with your
company logo on bespoke orders. Minimum
order quantities apply.