Owner`s manual

NM 28/38 BATTERY DISASSEMBLY OF UNIT
STEP 1
Remove the (4) #10 screws and (4) # 10 washers as shown in
gure A.
NOTE: Do not remove handle or handle hardware from side plates.
Figure A
STEP 2
Remove the (4) 6-32 screws and (4) 6-32 washers as shown in
gure B
Figure B
STEP 3
Remove the rubber side plate assembly from the unit as shown in
gure C.
Figure C
STEP 4
Remove the (1) 6-32 x 5/16 screw from the sheet metal case.
Slide the battery cell assembly from the electronics assembly as
shown in gure D.
Figure D
4
#10
screw
QTY 4
6-32
screw
QTY 4
6-32
screw
QTY 4
Approved Copy