Approved Copy ® W e On O . d orl a m S ne o h C rt ™ .
Approved Copy TABLE OF CONTENTS 1 IMPORTANT INTRODUCTION 2-3 FEATURES CHARGING WITH CINE VCLX/2 CHARGER CHARGING WITH CINE VCLX CHARGER 4 RealTime® LCD LOW BATTERY WARNINGS 5 GUIDELINES FOR OPTIMUM PERFORMANCE AND MAXIMUM LIFE SERVICE SPECIFICATIONS 6 LIMITED WARRANTY
Approved IMPORTANT Copy The CINE VCLX/2 Battery can only be charged with the CINE VCLX/2 or a CINE VCLX charger. DO NOT attempt to charge this battery with any other charger. The CINE VCLX/2 battery represents the latest in battery technology. Nickel Metal Hydride (NiMH) is similar to NiCad batteries in most characteristics. However, NiMH has more sensitive charging and discharging parameters and requires a longer charge time for optimum performance.
Approved FEATURES 1. 2. 3. 4. Copy Microprocessor Fuel Computer - Accurately monitors the energy put into and taken out of the battery. This data is processed with sophisticated programs that take into account battery age, self discharge, charge/discharge rate, cell imbalance and previously experienced charge/discharge cycles. The CINE VCLX/2 battery constantly “learns” its precise state of charge and remaining capacity. This data is automatically transmitted to the charger.
Approved Copy CHARGING WITH THE CINE VCLX CHARGER Charge this battery fully before using. Allow the battery to reach a steady green mode before using. Charging is automatic. The flashing red and green lights indicate the charger and battery are establishing communications. Simply plug the 19p LEMO connector from the CS-GBC cable into the charger and then plug the other end (19p LEMO connector) into the battery.
Approved Copy REALTIME LCD The CINE VCLX / 2 features a “RealTime” LCD providing “on-thefly” remaining run time estimates in 15 minute increments as well as simultaneously providing remaining capacity information using the traditional “Fuel Gauge” approach. No special adapters or set up is required. RealTime automatically calculates the load and displays capacity information and battery status at all times. 1. 2. 3.
ApprovedFOR Copy GUIDELINES OPTIMUM PERFORMANCE AND MAXIMUM LIFE 1. Keep batteries cool or at room temperatures whenever possible.Sustained elevated temperatures are the primary reason for premature failure of NiMH batteries: a. Charging - Charge batteries at room temperature. In warm climates keep chargers in air conditioned rooms that are maintained between 65°F to 85°F for best performance. b. In the Field - Do not leave batteries in a hot vehicle trunk or out in direct sunlight unnecessarily. c.
Approved Copy LIMITED WARRANTY accessory not manufactured by and/or specified by Anton/Bauer. This warranty does not cover, and Anton/Bauer assumes no responsibility for, any equipment or devices used in conjunction with the Product. 0-12 MONTHS - “Anton/Bauer will repair or replace the product at Anton/Bauer’s option - FREE OF CHARGE.” This limited warranty for the product specified in this document is given by Anton/Bauer, Inc. (“Anton/Bauer”), 14 Progress Drive, Shelton, Connecticut 06484.
Approved Copy The EPA certified RBRC® Battery Recycling Seal on the Nickel Metal Hydride (Ni-MH) battery indicates Anton/Bauer is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC® program provides a convenient alternative to placing used Ni-MH batteries into the trash or the municipal waste stream, which may be illegal in your area.
Approved Copy The following are trademarks of Anton/Bauer, Inc.: Anton/Bauer, Anton/Bauer logo and parallelogram design, Aspekt, Automatique, DataTap, DIONIC, Elipz, Egripz, Elightz, Essentialz, Gold Mount, HubZ, HyTRON, Impac, Interactive and design, LifeSaver, Logic Series, Logic Series Logo, Maxx man logo design, Nexus, PowerStrap, Proformer, Probe, ProPac, RealTime, Satellight, Snap-On, Stasis, Stasis Flex, Tandem, TrimPac, Ultrakit, Ultralight, “One World.
