User's Manual

8
For Windows 2000 and Windows Me only:
Click the volume button in the Sound Recording/Playback section to open the Volume
Control Panel.
For Windows 98SE only:
Click the button with the slider and microphone/speaker.
3. On the Volume Slider Panel, ensure that M
UTE is not activated.
4. Adjust volume using the volume slider (Up increases volume and Down decreases).
5. Click ap
ply, and then click OK
Volume adjustment (with Windows XP)
You can adjust the sound recording or playback volume using the volume slider in your
computer’s multimedia settings by completing the following:
1. Go to Start –> Control Pane –> Sound Speech & Audio Devices –> Sound & Audio
Devices.
2. Click on the Audio
tab, and confirm that GN 502 USB/GN 503 USB Audio as the
preferred device for sound recording/playback. If it isn’t, click ap
ply, and then OK.
3. Click on the V
olume tab, ensure that MUTE is not activated.
4. Adjust volume using the volume slider (Up
increases volume and Down decreases).
5. Click ap
ply, and then click OK.
3.2 Use—with Mac
Recording an audio file (with OS 9)
1. With OS 9: Open the application SimpleSound on your hard drive.
With OS 9.1: Go to the Apple menu –> Control Panel –> Sound application.
Then click on the A
lerts tab, and then click on New Sound.
2. Click Add
to open the record window.
3. Click R
ecord and create a voice file.
4. Click the S
TOP button when finished recording.
5. To review your record, click the PL
AY button.
If you hear your voice, your recording was successful.
GN 502-3 USB_NA 10/7/04 2:18 PM Side 8