SDS

ManualsBrandsAntop ManualsAV AccessoriesPaper Thin Indoor HDTV Antenna with Table Stand 35 Mile

Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133

MATERIAL SAFETY DATA SHEET

Version 2.0

MSDS

MATERIAL SAFETY DATA SHEET

Prepared For: ANTOP ANTENNA, INC.

1650 SOUTH BALBOA AVENUE

ONTARIO, CALIFORNIA 91761-8087, UNITED STATES OF AMERICA

Prepared BY: SHENZHEN ANTOP TECHNLOLGY CO., LTD.

301.NO.2 WORKSHOP LONGQIAOHUA INDUSTRIAL ZONE LUOTIAN

FOREST FARM, SONGGANG STREET BAOAN DISTRICT 518100

SHENZHEN CITY, GUANDONG PROVINCE PEOPLE’S REPUBLIC OF CHINA

Issue Date: July 30, 2019

Report Number: ANTOP20190730 AT-133

Written by: Shenzhen Antop Technology Co., Ltd. & Antop Antenna, Inc.

Approved by: Eric Jiang, President, Antop Antenna, Inc.

Summary of content (7 pages)

PAGE 1
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET MSDS MATERIAL SAFETY DATA SHEET Prepared For: ANTOP ANTENNA, INC. 1650 SOUTH BALBOA AVENUE ONTARIO, CALIFORNIA 91761-8087, UNITED STATES OF AMERICA Prepared BY: SHENZHEN ANTOP TECHNLOLGY CO., LTD. 301.NO.
PAGE 2
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET Section 1 - Chemical Product and Company Identification Product: DVB-T9025SIA Common Name: Paper-Thin Indoor TV Antenna Trademark: N/A Style/ Item No.: AT-133 Manufacture: SHENZHEN ANTOP TECHNOLOGY CO., LTD. Address: 301, NO.
PAGE 3
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET Section 3 - Contact Hazards Method: Skin contact: No danger from normal use. Eye contact: Solid or particulate material may cause irritation when exposed to the eye. Inhalation: The gas produced by the raw material when melted may aggravate the lungs and respiratory system. If handling materials when melted, an air purifier and/or mask should be installed or used.
PAGE 4
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET Section 7 - Handling and Storage Precautions in Handling: As a general combustible solid, do not stack raw material or allow for fine particles of the material to be disbursed in the air to reduce the risk of explosion. Storage Conditions: Keep away from fire and combustion. Do not store above 140 degrees Fahrenheit / 60 degrees Celsius. Fire Protection: Not necessary under normal use.
PAGE 5
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET Section 10 - Stability and Reactivity Stability: Stable under normal conditions. Reactivity: The materials that are used in the manufacture of this product present no significant reactivity hazards. Material to Avoid: None known. Avoid overheating or burning of item. Do not heat to more than 140 degrees Fahrenheit / 60 degrees Celsius.
PAGE 6
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET Section 15 - Regulatory Information All components are listed on the TSCA; EINECS/ELINCS; and DSL, unless noted otherwise below. U.S. Federal Regulation: TSCA Section 8b – Inventory Status: All chemicals comprising this product are either exempt or listed on the TSCA Inventory.
PAGE 7
Antop Antenna, Inc. – MSDS REPORT NO: ANTOP20190730 AT-133 MATERIAL SAFETY DATA SHEET Section 16 - Other Information Disclaimer: Antop Antenna makes no warranties as to the accuracy or completeness of this information and disclaims any liability in connection with its use. Antop Antenna’s obligation shall be only as listed in Antop Antenna’s standard terms and conditions of sale for this product.