User Guide

2 / Connecting
2.1.1 Select entry point to house. Drill hole under the eaves at entry point. Attach coaxial
cable with water proof cap end to connector in the antenna. For horizontal Wall Mount utilize
U-shape coaxial cable setup to prevent water from entering interior of antenna casing. With
antenna fixed to either a mast pole or an exterior wall, feed lose end of coaxial cable through
drilled opening.
Select entry point to house. Drill hole at entry point. Attach coaxial cable with water proof cap
end to connector in the antenna. Fix the antenna onto beam or wall. Feed lose end of coaxial
cable through drilled opening.
2.1 For Outdoor Use, Mast Pole or Wall Mount Prepping for Connection
2.2 For Indoor Use, in Attic placement, Prepping for Connection
Connect other end of the coaxial cable to the short coaxial cable from power inserter. Attach
the long coaxial cable from power inserter to the ANTENNA/CABLE IN connector on the back of
the TV or converter box. Connect the power adapter to the DC socket in power inserter. The
antenna must be powered in order to function.
2.3 If you haven’t already done so, attach coaxial cable to connector in
the antenna
3
Determine location in attic where antenna will be placed. To mount antenna onto a beam or
wall, preferably on the side of the house facing the TV station transmitters, fix the antenna
onto the beam or wall with screws (screws not provided).
1.3 For Indoor Use, In Attic
The bottom of antenna