Installation Instruction Manual Your Smart Boost Amplified HDTV & FM can be used either as an could or Indoor antenna. Ant Op's exclusive Smart Boost System (SBS) that allows you to adjust the antenna’s reception power with a simple tm of 2 dial! The Fiat Panel Is part of PANTOS New Generation Digital Technology that allows you the edibility 1o set up your antenna In various locations and steel receive a great digital reception.
/ Installation for Outside Use 1.4 For Outdoor Use, Mast Pole Mounting Install a mast pole (nok provided) on the house, preferably an rooftop or the side of the house facing the TV station transmitters. Attach the antenna to the mast pole by using the damp iit provided. i.
.2.1 Horizontal or Vertical Mounting Mount hardware horizontally or vertically to the wall. Before aliasing hardware back to the antenna, see Connecting instructions. To attach hardware back to backside of antenna, insert fastening bot and turn clockwise. 1.3 For Indoor Use, In Attic Determine location In attic where antenna will be placed.
1.4 For Indoor Use, with Table Stand To remove antenna hardware from backside of unit, release fastening bok by muting counter clockwise. Attach the Table Stand to the bottom of antenna. If you want to strengthen VHF reception, fix the VHF enhanced rods onto antenna, o PALE ma 2.1 For Outdoor Use, Mast Pole or Wall Mount Prepping for Connection 2.1.1 Select entry point to house. Dill hole under the eaves at entry point. Attach coaxial cable with water proof cap end to connector In the antenna.
2.2 For Indoor Use, In Attn placement, Prepping for Connection Select entry point to house. Dill hole ab entry point, Attach coaxial cable with water proof cap end to connector In the antenna, Attach anteing back to hardware already mounted to beam or wall, or Just use the table stand for placement. Feed ose end of coaxial cable through deified opening. 2.
3 Setting and Scanning In the TV's setup many, set the mode fo “Antenna” or “Air, then, set TV to "Scan” for channels. Consult the TV manual Tor detailed instructions, CHANNEL SCAN © scaring for channels — 4 | Adjusting Instruction Far the best reception, adjust the direction of antenna. Bested on wall mounting, the antenna can be turned lef or ght within 45° angle by releasing the bolt.
WARRANTY POLICY Customers should first contact their place of purchase to determine the resellers warranty policy. Anton Bandanna's warranty wil take effect after the expiration of resellers policy. Ardor Arden's, wrens is products for a period of one (1) bear from the original date of purchase, Warranty Is valid only with proof of purchase.
1.4 Para uso interior con base para meas Para retirar €l soporte físico de fa antena en la parte posterior de la unidad, alfe & limo de suficiente con vuelta hacia la derecha. Una 1a base para mesa a la parte inferior de la antena, Para fortalecer la rencionar de ondas VHF, colocar ef tubo en las tominejos, gibe para conectar. Afiele of tiro con sna hacia a derecha. sl mel 2.4 Preparación de la conexión exterior, montarle en poste © en pared 2.1.1 Seleccione of punto de entrada 3 la casa.