TM220HD HD encoder DVB-T/DVB-C out USER MANUAL V1.
TM220HD USER MANUAL Congratulations on your purchase of the TM220HD ! This ‘state of the art’ product, is a HD encoder. The video and audio input or taken from HDMI. After compressing the video into H264 and audio in AAC, the output can be configured as DVB-T or as DVB-C modulator. Stand-alone configuration is made easy through 4 tact switches and ergonomic menu’s. To make the configuration of the TM220HD ultra simple, a special software TMHDIface is available that you can download on our website anttron.
TM220HD USER MANUAL 1 - Safety considerations 1.1 CONNECTING TO THE MAINS SUPPLY This product has to be connected to the mains supply. If there is the slightest doubt concerning the type of connection available on the installation, please contact your supplier of electricity. Before carrying out maintenance operation or modification of the installation, the modulator has to be disconnected. Remark : only use the supplied power adaptor. 1.
TM220HD USER MANUAL 2 - Description of the different elements C1 C2 C3 C4 Power supply input (5V/4A) USB input (for programming the TM250HD by PC) RF input RF output C1 DC input C2 USB C3 C4 INPUT OUTPUT C6 C6 HDMI input COMPONENT VIDEO INPUT Pb Y Pr AUDIO INPUT L R HDMI HD encoder DVB-T / DVB-C output A1 T1 T2 T4 T3 TM220HD A1 Display T1 CANCEL/RETURN button T2 ENTER button T3 u (move forward/down) button T4 t (move backward/up) button ANTTRON ©2013 PAGE 4
TM220HD USER MANUAL 3 - Installation and menu structure 3.1 - Installation Install the TM220HD against a wall using the wall fixation brackets to ensure cooling of the housing through natural convection. ( see drawing) Connect the audio and video source using a HDMI cable. Connect the RF input cable (if present) and the RF output cable. If the RF input is not used, please connect a 75 ohm terminating resistor to it.
TM220HD USER MANUAL 3.3 - Menu structure The TM220HD has different menus allowing easy access to the differents parameters and to change them when necessary. Below you will find the structure of the different menus. CONFIGURATION MAIN MENU DVB-T MODULATOR DVB-C MODULATOR CONFIGURATION DVB SETTINGS A/V SETTINGS TS SETTINGS LANGUAGE DEFAULT CONFIG.
TM220HD USER MANUAL 4 - Setting up the TM220HD 4.1 - The CONFIGURATION menu In this menu you can setup your TM220HD as DVBT modulator or DVBC modulator. Select the appropriate option with the buttons u and t and press the ENTER button to confirm. CONFIGURATION DVB-T MODULATOR DVB-C MODULATOR 4.2 - The DVB settings menu If the TM220HD is configured as DVBT modulator or DVBC modulator, you can set in this menu the output frequency, bandwidth, output level and specific parameters for DVB-T or DVB-C.
TM220HD USER MANUAL 4.2.1 - Setting DVB-T parameters FREQUENCY BANDWIDTH ATTENUATION DVB-T When you select DVB-T and press the ENTER button, the following submenu appears. It allows you to set the DVB-T parameters. MODE CONSTELLATION F.E.C. GUARD INTERVAL 2K 8K Select the mode MODE CONSTELLATION F.E.C. GUARD INTERVAL QPSK QAM16 QAM64 Select the constellation MODE CONSTELLATION F.E.C. GUARD INTERVAL 1/2 2/3 3/4 5/6 7/8 Select the F.E.C. MODE CONSTELLATION F.E.C.
TM220HD USER MANUAL 4.3 - The AV settings menu This menu allows you to adjust specific video and audio parameters. Set the video bit rate VIDEO RATE 9000_ 8 Xfbc0123456789 VIDEO RATE AUDIO RATE HDMI-PCM VOLUME Select the audio bitrate 192 Kb/s 256 Kb/s 320 Kb/s 384Kb/s VIDEO RATE AUDIO RATE HDMI-PCM VOLUME Select the audio volume x1 x2 x4 VIDEO RATE AUDIO RATE HDMI-PCM VOLUME 4.4 - The TS settings menu This menu allows you to adjust specific parameters of the transport stream.
TM220HD USER MANUAL NIT RELEASE NET ID. ORIG. NET. ID. NETWORK NAME NIT RELEASE 27_ 8 Xfbc0123456789 Set the NIT version NIT RELEASE NET ID. ORIG. NET. ID. NETWORK NAME NET ID. 27_ 8 Xfbc0123456789 Set the Network ID. NIT RELEASE NET ID. ORIG. NET. ID. NETWORK NAME ORIG. NET ID. 27_ 8 Xfbc0123456789 Set the Original Network ID. NIT RELEASE NET ID. ORIG. NET. ID. NETWORK NAME NETWORK NAME NoName_ 8 Xfbc0123456789 Set the NETWORK NAME NET ID. ORIG. NET. ID. NETWORK NAME TS ID. TS ID.
TM220HD USER MANUAL 4.5- The language menu Select in this menu your preferential language. 4.6 - Default configuration When selecting this option, all your modifications will be lost, and the default factory settings will be restored. 5 - Programming using a PC The settings of the TM220HD can also be changed using a PC. First, please install the software TMHDIFace on your PC. You can download this software from our internet site anttron.
TM220HD USER MANUAL 6 - Technical specifications Video input Audio input DVB Processing DVB-T output DVB-C output Power Dimensions EAN code Input HDMI Resolution modes 480p -576p -720p - 1080i Compression H.264 – bitrate 5-15 Mb/s Input HDMI Sample Rate HDMI (32kHz / 44.