User Manual H S 3 1 5 User Manual HS315 Digital Enhanced Cordless Communications Depending on different models, not all features may be available in this general manual.
User Manual Contents Introduction.................................................................................................. 3 Physical Details............................................................................................ 5 What the symbols mean................................................................................ 7 Setting up your telephone ............................................................................. 8 Installation............................................
User Manual Introduction Overview Thank you for purchasing our Skype DECT product. We hope that you spend many happy hours using it and chatting with Skype! With the HS315 you can make ordinary telephone call and Internet calls using Skype™ and SkypeOut. An ordinary telephone call is a call between two telephone line subscribers. A Skype™ call is between two registered Skype™ users. These calls are free of charge.
User Manual Package Content The contents of your product should contain the following items. For any missing items, please contact your dealer immediately. USB Dongle Power adapter (AC 7.5V, 350mA) DECT Telephone Cable (RJ-11) CD Installation Battery Cell (1.2 x 2V 750 mAh) Quick Start Guide Note To make Internet calls your PC must be turned on and the Skype™ software must be activated.
User Manual Physical Details The Handset and Base Unit Left Key Right Key Press to enter menu and submenu mode; Press to confirm selection; With the key “*” to lock or unlock the keypad; Press during a call to mute the mouthpiece. Press to enter phonebook menu; Press during programming to go back to the previous option; Press to clear digits from the display. End /On-Off Key Call / Recall Key Press to end a telephone call.
User Manual The USB dongle Register Button LED light Page 6 of 37
User Manual What the symbols mean Batteries Charge Level Whenever this shows ‘nearly empty’ ( ), put the handset on the base unit to charge the batteries. While the batteries are being charged, the level shown will keep changing. Mute Your handset's microphone is muted. Signal Level Shows the signal between the handset and base unit, and disappear when you are out of range of the base unit. Speakerphone Your handset’s loudspeaker is on. Lock Your handset’s keypad is locked.
User Manual Setting up your telephone Connection and conditions for use You can connect your HS315 to a direct exchange line (DEL), a line connected to a local exchange, with its own phone number; to an extension socket connected to a DEL; or to an extension on an approved compatible PBX. Do not connect the HS315 as an extension to a payphone. How many phones can you connect? The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.
User Manual Installation 1. Choose a suitable site for the base unit Make sure it is not near to another telephone, nor to other electrical equipment. 2. Plug the mains power lead and the telephone line cord into the bottom of the base unit. 3. Plug the mains adapter into a 230 V AC, 50 Hz mains socket with the switch on the socket set to OFF. Note: The illustration of adaptor may vary from country to country. 4. Switch on mains power at the socket 5.
User Manual 6. Connect the base unit to telephone wall socket by a telephone line 7. Plug the USB dongle into your PC USB socket Note: Your HS315 is supplied with the handset and USB dongle already registered to the base unit; you shouldn't need to register them. Refer to Settings section of this manual for the information on how to register. 8. Download the latest version of Skype from www.skype.com This is a Windows-based installation.
User Manual Note: The Skype software must be activated manually on your PC before you place SkypeOut and Skype™ calls every time. Recommended disable your PC from entering sleep mode to ensure the availability of Skype communication. Congratulations! The installation procedure is now complete. If you experience any problems on using this phone, refer to the Troubleshooting section elsewhere in this guide.
User Manual Important safety information This equipment is not designed for making emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency services. (This means that you should also have a basic phone that does not need mains power, connected to your line so that you can make calls during a power failure) People with a heart pacemaker should consult their doctor before using the telephone.
User Manual Making and Answering Calls Note: In standby mode, press any button on keypad except “Talk” button to make the backlight come on before enabling any function. (It means 1st press to turn on the backlight, 2nd press to activate the function button. This is correct for all buttons except for “Talk” button.) To Make an Ordinary Call • Enter the telephone number and press Call • If you make a mistake, press Right press Call key.
User Manual To Call a Skype™ User Make sure the Skype™ user is available in your Skype net Contact list and is online. Otherwise, add the online Skype™ user name you wish to call to the Contacts list of Skype net fist. It will automatically appear in your phone’s Skype list. To call a Skype™ user: 1. Press Scrolling stored names; button up to enter Skype mode directly, the display shows the 2. Press Scrolling button up / down to select the name you wish to contact; 3.
User Manual To Mute the Mouthpiece 1. During a call, press Left key once to mute the mouthpiece; 2. While the mouthpiece is muted, you cannot press any number key to send digits down the line; 3. Press Left key again to get back to the Call. Call Waiting HS315 DECT has a Call Waiting feature that works with Caller ID service from your telephone service operator.
User Manual 5. Press Left key to toggle the phone connection. (If you want to hook down the key to enter option and Scrolling Skype call, press Right Hook down, then press Left button to select key) To Make a Skype Conference Call: 1. When you already engaged on an ongoing call, if another Skype call is received, press Right key to enter option menu; 2. Then press Scrolling 3. Press Right 4. Press Scrolling 5.
User Manual Phone Book Up to 50 records could be stored in each handset's Phone Book. Each record can store up to 20 digits, and names of up to 10 characters. In standby mode, press Right the display shows phonebook list. key, and To Enter Phone Book mode: There are two ways to enter Phone Book mode as following: • Select Phonebook under menu mode. • Press Right key to enter Phonebook mode directly. To Store New Number into Phonebook 1. In standby mode, press Right 2.
User Manual 2. Select the number you want to delete, then press Left key, then Scrolling button till to the location Delete; 3. Now press Left shows Delete? ; 4. Press Left key to delete current number or all numbers; the display key to delete the number/numbers. To Modify (Change) a Number in Phonebook 1. Under Phonebook mode, press Scrolling numbers; button to scroll through the stored 2.
User Manual 2. Press Left key to enter Option menu, then Scrolling location Skype out; 3. Press Left button to the key to place Skype Out call. Call Lists You must subscribe to Caller ID service from your service provider to use this feature. Call Logs store information related to Received calls, Missed calls and Dialed calls. HS315 can store up to a maximum of 30 calls, consisting of 10 Received, Missed and Dialed calls respectively. To Check Call Records 1. Select Call list under menu mode; 2.
User Manual 5. Press Left key to store it. To Delete Call Records 1. See steps 1-3 above; 2. Select one number, then press Left location Delete Current or Delete All key and Scrolling 3. Press Left key, the display shows “Delete?” 4. Press Left key to confirm. button to the To Check Notification Alert You must subscribe to Notification service from your service provider to use this feature. 1. Select Call list under menu mode; 2.
User Manual Settings To Enter Handset Settings Mode 1. Select Settings under menu mode; 2. Press Left key, select Handset set under Setting mode; the display shows Wall Paper, Ringer Set, Auto-talk, Handset Name and Language; To Set Wall Paper 1. Select < Wall Paper> under Handset Set mode; 2. Press Left pictures; key to confirm, and press Scrolling button to scroll through the 3. Choose the picture you prefer, and then press Left picture is set to the wallpaper of the handset.
User Manual To Set Key Tone On/Off Each time you press a key on your handset, you hear a tone. You can turn this off if needed. 1. Select < Ringer Set> under Handset Set mode; 2. Press Left key to confirm, then Scrolling 3. Press Left key and Scrolling 4. Press Left key to confirm. button to the location Key Beep; button to set the key beep ON/OFF; Auto Talk Function Normally, you need to press the Call button to answer an incoming call.
User Manual To change Handset Name 1. Select under Handset Set mode;; 2. Press Left key to confirm, the display shows the current name; 3. Press and hold the Right 4. Press Left key to clear the old name, then key in the new name; key to confirm to the change. To Set Language You can select the language from the menu up to your preference. 1. Select < Language> under Handset Set mode; 2. Press Left key and Scrolling 3.
User Manual To Set Base Melody (1-9 melody) 1. Select < Ringer Settings> under Base Settings mode; 2. Select under Ringer Settings; 3. Press Left key Scrolling button to set the melody you prefer; 4. Press Left key to confirm. To Set Flash Time You can change flash time to short or long. 1. Select < Dial Settings> under Base Settings mode; 2. Select under Dial Settings; 3. Press Left Short; key and Scrolling 4.
User Manual 2. Select under Dial Settings; 3. Press Left PULSE; key and Scrolling 4. Press Left key to confirm. button to change dial mode as TONE or Call Barring Function Call barring enables you to restrict or bar certain types of calls from your phone. To Set Call Barring Number 1. Select < Call Barring> under Base Settings mode; 2. Select under Call Barring; 3.
User Manual To Set LCR 1. Select under Base Settings mode; 2. Press Left key, and key in the PIN; 3. Press Left key, then key in the SHORT number that you want to replace the long number; 4. Press Left key to confirm, then key in the LONG number; 5. Press Left key to confirm. To Change Base PIN 1. Select under Base Settings mode; 2. Press Left key, and key in the original PIN (default PIN:0000) number; 3. Then press Left key to confirm, and key in New PIN; 4.
User Manual Registration Your HS315 is supplied with the handset and USB dongle already registered to the base unit; you shouldn't need to register them. But if you've bought extra handset, you'll need to register each one to your original base unit. Maximum 3 handsets can be registered to one base. To Enter Registration Mode 1. Select Settings under menu mode; 2. Press Left key, select Registration and the display shows Select Base, Base Sub and De-register. To register a handset 1.
User Manual To register a USB dongle 1. Press and hold the Handset locator button on the base unit for a while, until you hear "beep" sound twice continuously; 2. Insert the USB dongle into your PC USB port; 3. Use a paper clip or a pencil tip to depress and hold the register button of dongle for 2~3 seconds, then release and you will hear a confirmation tone from Base unit. Extra Setting To Set Alarm Time 1. Select EXTRA under menu mode; 2. Select < Alarm Set > under EXTRA mode; 3.
User Manual 2. Press Left key, then key in the date; 3. Press Left key to save; Skype Function To Make Skype Call from Contact List 1. Select Skype under menu mode; 2. Select < Contact List > under Skype mode; 3. Press Left 4. Press Scrolling 5. Press Call key, then the display shows the Skype online user list; button to select the record you wish to call; key to place a Skype call. Note: Press shortcut key Up-button in the scrollbar to enter the Skype contact list directly or use above steps.
User Manual To Set User Status 1. Select Skype under menu mode; 2. Select < User Status > under Skype mode; 3. Press Left 4. Press Scrolling 5. Press Left key, then the display shows the selection status; button to select the status you wish to set; key to save. Resetting the system If you have set a PIN and forgotten it, you need to reset the system. The PIN will be reset to 0000.
User Manual 2. Key in the number of the other handset On the other handset's display, your number appears, and the INT symbol flashes. Then the other handset user presses the Call key to connect the call. For details of how to change the ringing melody and volume for intercom calls, see "INT MELODY" and "INT VOLUME" under "HANDSET SETTING" part. To End an Intercom Call • Press the Call key on your handset. The other person will hear Busy tone, and also need to press the End key to hand up.
User Manual Look for the CD-ROM icon namely HS-315 under PC “My computer” and double chick to enter the installation interface manually and select the setup icon. Click My computer > HS-315 > setup The installation CD Graphic User Interface will appear on your screen as following: Please follow the setup in the wizard and the driver should be able to install successfully. If you still can’t enter the installation interface, please check whether the CD-ROM or PC CD ROM Drive is broken.
User Manual If you still can’t make calls, try re-registering the handset. When I place Skype call, there is no sound. Check the network. Check Skype interface by following way. Click Tools at the Skype interface menu bar and select . Then select to enter configuration page. Select SDA200 in
User Manual The PC Sound comes out from incorrect Sound Card. It only happens if the PC installed two or more Sound Cards. You can re-map the sound card devices by following way. Enter the and select . Choose the Tab. And then you can re-map your sound card setting on the Sound playback and Sound recording. The CHARGE light on the base unit does not come on." Check the handset is properly stationed.
User Manual You may need to replace the batteries. I cannot transfer a call. Make sure the other handset is within range of the base unit, and is not busy on a call. Make sure you are keying in the correct number for the other handset. No display on LCD screen. Make sure the batteries have power. I cannot register handset to base Make sure the number of handset registered to base is less than 3.
User Manual Operating time Temperature range Operating 00C to 400C Storage -200C to 600C Electrical power Handset---one 1.2 x 2 V 750 mAh Ni-MH, Rechargeable battery cell Base unit---input 230 V AC, 50 Hz; output AC 7.5 V, 350 mA. PABX compatibility Timed break recall: 100 ms for short flash; 250 ms for long flash Pause length: 3 seconds. Signaling type: DTMF (dual-tone multifrequency) Pulse dialing .
User Manual P age 37 of 37