User's Manual
Table Of Contents
- Chapter 1:INTRODUCTION
- Chapter 2:INDICATIONS, CONTRAINDICATIONS AND WARNINGS
- Chapter 3:WIRING AND CONTROL PANEL OF CONSOLE
- Chapter 4:OPERATION INSTRUCTION FOR ESNAVI SOFTWARE
- 4.1Installing Software
- 4.2Uninstalling Software
- 4.3Basic Operation of Software
- Chapter 5:USAGE OF CAPSULE
- Chapter 6:USAGE OF DATA RECORDER
- Chapter 7:INSTALLATION AND TRAINING
- Chapter 8:MAINTENANCE
- Chapter 9:WARNINGS, CAUTIONS AND TROUBLESHOOTING
- 9.1ESNavi Error Messages
- 9.1.1.1.1.Check if camera is connected firmly
- 9.1.1.1.2.Equipment initialization error
- 9.1.1.1.3.Port "COM7" does not exist
- 9.1.1.1.4.Video monitoring connection fails
- 9.1.1.1.5.Port "COM8" does not exist
- 9.1.1.1.6.Serial port initialization error
- 9.1.1.1.7.Port "COM4" does not exist
- 9.1.1.1.8.Cannot connect to Data Recorder
- 9.1.1.1.9.Password error
- 9.1.1.1.10."Print error" prompt box
- 9.2Problems with Translational Rotation Platform
- 9.3Problems with Capsule
- 9.4Problems with Data Recorder
- 9.5Problems with Locator
- 9.1ESNavi Error Messages
- Chapter 10:TECHNICAL SPECIFICATIONS
- Chapter 11:SYSTEM LABELING
NaviCam
®
Stomach Capsule User Manual Page | 25
AnX Robotica Corp. UM-NCES-ST-01 Rev 1
Figure 4- 14 Rtdisply Interface
2. Rtdisply interface is used to display images captured by the capsule endoscope
inside the human digestive tract and adjust the capsule running status in real-time.
The Data Recorder should be connected to the computer via USB for Rtdisply. If
the Data Recorder is not properly connected, the connection status display area
on the status bar on the Rtdisply interface as shown in Figure 4- 14 will display in
red font “Unable to connect to data recorder”. In this case, images captured by
the capsule cannot be displayed in real-time and buttons in the right toolbar are
unavailable.
3. When the Data Recorder is connected to the computer via USB, buttons on the
Rtdisply interface become available. The connection status display area in the
status bar will display in black fond “Connected to data recorder”. In this case,
capsule initiation is viewed in real-time, as shown in Figure 4- 15. Real-time
images and captured images are automatically saved in the patient data export
path, double click any real-time image or captured image to be directed to the
related directory. The format of Rtdisply images in the patient data export path is
“Patient name (case No.)_Capsule ID_examination date_RTImages” folder,
and captured images are saved in “Captured” folder in the Rtdisply image saving
path.