User's Manual
Table Of Contents
- Chapter 1:INTRODUCTION
- Chapter 2:INDICATIONS, CONTRAINDICATIONS AND WARNINGS
- Chapter 3:WIRING AND CONTROL PANEL OF CONSOLE
- Chapter 4:OPERATION INSTRUCTION FOR ESNAVI SOFTWARE
- 4.1Installing Software
- 4.2Uninstalling Software
- 4.3Basic Operation of Software
- Chapter 5:USAGE OF CAPSULE
- Chapter 6:USAGE OF DATA RECORDER
- Chapter 7:INSTALLATION AND TRAINING
- Chapter 8:MAINTENANCE
- Chapter 9:WARNINGS, CAUTIONS AND TROUBLESHOOTING
- 9.1ESNavi Error Messages
- 9.1.1.1.1.Check if camera is connected firmly
- 9.1.1.1.2.Equipment initialization error
- 9.1.1.1.3.Port "COM7" does not exist
- 9.1.1.1.4.Video monitoring connection fails
- 9.1.1.1.5.Port "COM8" does not exist
- 9.1.1.1.6.Serial port initialization error
- 9.1.1.1.7.Port "COM4" does not exist
- 9.1.1.1.8.Cannot connect to Data Recorder
- 9.1.1.1.9.Password error
- 9.1.1.1.10."Print error" prompt box
- 9.2Problems with Translational Rotation Platform
- 9.3Problems with Capsule
- 9.4Problems with Data Recorder
- 9.5Problems with Locator
- 9.1ESNavi Error Messages
- Chapter 10:TECHNICAL SPECIFICATIONS
- Chapter 11:SYSTEM LABELING
NaviCam
®
Stomach Capsule User Manual Page | 63
AnX Robotica Corp. UM-NCES-ST-01 Rev 1
add a circular mark on the image by moving your mouse over the image, and
clicking and holding down left mouse button to drag your mouse, as shown in
Figure 4- 81. Click to undo the previous mark and click to undo all
marks. Marks will be reflected on images in the thumbnail.
Figure 4- 81 Add Mark
3. Click to select the first marked or captured image, click to select the
previous marked or captured image, click to select the next marked or
captured image, and click to select the last marked or captured image.
Alternatively, you can move your mouse over an image to scroll over images to
select the desired image.
4. Click to access the Add Comment interface as shown in Figure 4- 82. You
can enter textual descriptions to corresponding images into the comment text box
by two input sources: one is manual input and the other is to double click useful
expressions in the useful expression list. After the software is installed, the useful
expression list populates automatically. Users can add or delete a useful
expression as required. The comments added will be reflected on images in the
thumbnail.