User Manual

1)Thermostat networking steps:
2)Mobile phone networking steps:
Before configuring WIFI , please make sure your phone is connected to 2.4GHz WIFI.
1. Use your mobile phone to scan the QR code below to download the”Tuya Smart ”app.
China
Foreign
2.Open the“Tuya Smart ” app and
click “Add Device “as shown below.
3.After clicking”Small Home Appliances”,
select “Thermostat”as shown below.
4.Click”confirm indicator rapidly
blink”as shown below.
5.After entering the WIFI password,
press”Confirm”as shown below.
6.The phone enters the device search and
the connection mode is as shown below.
7.The mobile phone adds the device connection
successfully, click”Done”as shown below.
8.Click on the”Done”button above to enter the control interface as shown below.
3)Device sharing instructions:
4.After entering the account number
1.Click” “as shown
2.Click”Share Device”
3.Click”Add Sharing”
as shown below.
as shown below.
,click”Done”as shown below.
below.
connection is successful. Please note that the router or the corresponding WiFi device is turned on and
hear the buzzer ringing 3 sounds, the thermostat enters the distribution network interface. After the
screen displays full display(or press the power button to exit)the thermostat has entered the network
initialization status .When the WiFi symbol " " of the thermostat does not flash, it indicates that the
within 5 meters of the thermostat.
state (also the distribution network state).
4)Thermostat and mobile phone Exit the network:
Press and hold the up and down button for about 5 seconds while the thermostat is off. When
the buzzer sounds 3 times into the distribution network interface, the screen displays full display.
At this time (or press the power button to exit) the control panel has entered the network exit
Press and hold the up and down keys for about 5 seconds when the thermostat is turned off . When you