User manual

Important User Information

This document is a product guide describing the main use cases for the Anybus Wireless Bridge - Ethernet to

WLAN module and how to configure it. It also contains general information about the product.

The reader of this document is expected to be familiar with high-level software design, and communication sys-

tems in general. The use of advanced Ethernet and Bluetooth specific functionality may require in-depth knowl-

edge in the networking internals of these networks and/or information from the official specifications. In such

cases, the people responsible for the implementation of this product should either obtain the specifications to gain

sufficient knowledge or limit their implementation in such a way that this is not necessary.

Liability

Every care has been taken in the preparation of this product guide. Please inform HMS Industrial Networks AB of

any inaccuracies or omissions. The data and illustrations found in this document are not binding. We, HMS Indus-

trial Networks AB, reserve the right to modify our products in line with our policy of continuous product develop-

ment. The information in this document is subject to change without notice and should not be considered as a

commitment by HMS Industrial Networks AB. HMS Industrial Networks AB assumes no responsibility for any er-

rors that may appear in this document.

There are many applications of this product. Those responsible for the use of this device must ensure that all the

necessary steps have been taken to verify that the applications meet all performance and safety requirements in-

cluding any applicable laws, regulations, codes, and standards.

HMS Industrial Networks AB will under no circumstances assume liability or responsibility for any problems that

may arise as a result from the use of undocumented features, timing, or functional side effects found outside the

documented scope of this product. The effects caused by any direct or indirect use of such aspects of the product

are undefined, and may include e.g. compatibility issues and stability issues.

The examples and illustrations in this document are included solely for illustrative purposes. Because of the many

variables and requirements associated with any particular implementation, HMS Industrial Networks AB cannot

assume responsibility for actual use based on these examples and illustrations.

Intellectual Property Rights

HMS Industrial Networks AB has intellectual property rights relating to technology embodied in the product de-

scribed in this document. These intellectual property rights may include patents and pending patent applications

in the US and other countries.

Trademark Acknowledgements

Anybus ® is a registered trademark of HMS Industrial Networks AB. All other trademarks are the property of their

respective holders.

Anybus Wireless Bridge - Ethernet to WLAN User Manual Rev 1.30

February 2015 Doc Id HMSI-27-205