User manual

Supported Use Cases 18
Doc.Id. HMSI-27-205
Anybus Wireless Bridge - Ethernet to WLAN
Doc.Rev. 1.30
Alternative 2 - Manual Configuration
This example show the settings when SMART mode 8 (Wireless Bridge 1) and 9 (Wireless Bridge 2) are
used. In addition to the values below, the Network Name (SSID) and security must be configured ac-
cording to the settings in the Access Point (AP).
Parameter Wireless Bridge 1 Wireless Bridge 2 Comment
IP Configuration
IP address 192.168.0.98 192.168.0.99
Subnet Mask 255.255.0.0 255.255.0.0
Gateway 192.168.0.98 192.168.0.98
IP Assignment Static Static DHCP is not supported in this mode
WLAN - Network
Network Name (SSID) SSID of AP SSID of AP
WLAN - General
Operational Mode Infrastructure Infrastructure
WLAN - Client Mode
Mode Ethernet Bridge Ethernet Bridge
IP Address 192.168.0.99 192.168.0.98
UDP Port 7 7