Data Sheet

Anybus® is a registered trademark of HMS Industrial Networks AB, Sweden, USA, Germany and other countries. Other marks and words belong to their respecve companies.
All other product or service names menoned in this document are trademarks of their respecve companies.
Part No: MMA104 Version 8 07/2019 - © HMS Industrial Networks - All rights reserved - HMS reserves the right to make modicaons without prior noce.
Communicator CAN
Protocol Congurable CAN 1.0, 2.0A and 2.0B based protocols
Baud rate 20 kbit/s - 1 Mbit/s
Physical standards CAN
Technical Details Standard
Weight 150 g, 0,33 lb
Dimensions (L•W•H) 120•75•27 mm, 4,72•2,95•1,06”
Protection class IP20, NEMA rating 1
Enclosure material PC ABS, UL 94
Installation position Any
Mounting DIN rail (35•7,5/15) EN 50022
Certications
UL File number: E 203225 UL 508 Ind. Cont. Eq.
Hazardous Locations CLASS 1, DIVISION 2, GROUPS A, B, C AND D, T4 ANSI/ISA-12.12.01-2000
ATEX Zone 2, Cat 3
(except Modbus RTU)
EN 60079-15
EN 60079-11
CE 2004/108/EC EN 61000-6-4
EN 61000-6-2
Electrical Characteristics
Power 24 VDC +/- 10 %
Current consumption Max 300 mA, Typical 100 mA
Hardware Characteristics
Reverse voltage protection Yes
Short circuit protection Yes
Galvanic isolation on subnetwork Yes
Environmental Characteristics
Operating temp -25 to 55
o
C, -13 to 131
o
F IEC 60068-2-1
IEC 60068-2-2
Storage temp -40 to 85
o
C, -40 to 185
o
F IEC 60068-2-1
IEC 60068-2-2
Relative Humidity 5-95 % non condensing IEC 60068-2-30
Installation altitude Up to 2 000 m
Immunity and emission for industrial environment
Electrostatic discharge +/- 4 kV EN 61000-4-2
Electromagnetic RF elds 10 V/m 80 MHz - 1 GHz
3 V/m 1,4 GHz - 2,0 GHz
1 V/m 2,0 GHz - 2,7 GHz
EN 61000-4-3
Fast Transients +/- 1 kV EN 61000-4-4
Surge protection +/- 1 kV EN 61000-4-5
RF conducted interference 10 V/rms EN 61000-4-6
Emission (at 10 m) 40 dB 30 MHz - 230 MHz
47 dB 30 MHz - 1 GHz
CISPR 16-2-3
Single Pack Accessories
• Conguration Cable (USB) Port • Installation sheet • Dsub with screw terminals for subnetwork
TECHNICAL SPECIFICATIONS
NETWORK SPECIFIC FEATURES
1 = Network connector, 2 = Baud rate,
3 = I/O data, 4 = Other
CANopen
1 = DSUB9M 2 = Up to 1 Mbit/s
3 = 512 byte IN/OUT 4 = Supports prole CIA DS301 V4.02
CC-Link
1 = 1*5p; 5.08 Phoenix Plug 2 = Up to 10 Mbit/s
3 = 896 IO points, 128 word IN/OUT 4 = Up to 4 occupied stations, 8
extension cycles
ControlNet
1 = 2*BNC Coax + RJ45 (NAP) 2 = 5 Mbit/s
3 = 450 byte IN/OUT 4 = Communications adapter, prole n. 12
DeviceNet
1 = 1*5p; 5.08 Phoenix Plug 2 = 125-500 kbit/s
3 = 512 byte IN/OUT 4 = Communications adapter, prole n. 12
EtherCAT -
2 port
1 = 2*RJ45 2 = 100 Mbit/s
3 = 512 byte IN/OUT 4 = DS301 V4.02 compliant, 4 FMMU Channels
EtherNet/IP - 2
port
1 = 2*RJ45 2 = 10/100 Mbit/s 3 = 509/505 byte IN/OUT
4 = EtherNet/IP group 2 and 3 server. Modbus TCP slave functionality
Modbus RTU
1 = DSUB9F 2 = 1,2-57,6 kbit/s 3 = 512 byte IN/OUT 4 = RS232 and
RS485
Modbus TCP -
2 port
1 = 2*RJ45 2 = 10/100 Mbit/s 3 = 512 byte IN/OUT
4 = Security framework
PROFIBUS
1 = DSUB9F 2 = Up to 12 Mb
3 = 244 IN/OUT (344 total) 4 = Probus DP (IEC 61158)
PROFINET IO
- 1 port
1 = RJ45 2 = 100 Mbit/s 3 = 512 byte IN/OUT
4 = RT Communication and Cyclic data exchange
PROFINET
IRT - 2 port
1 = 2*RJ45 2 = 100 Mbit/s 3 = 220 byte IN/OUT
4 = RT Communication and Support for I&M
The easy to use, visual based
Anybus Conguraon Manager
contains pre-prepared
funconality for CAN frame
building that gets your devices
up and running in no me.
Power connector
with screw terminals
Status LEDs
Conguration switches
(if existing, behind lid)
Network connector
(see number 1 above)
DIN rail connector
Conguration port
CAN subnetwork
connector (DSUB 9-Pole
female)
HMS Industrial Networks – Worldwide
HMS - Sweden (HQ)
Tel : +46 35 17 29 00 (Halmstad HQ)
E-mail: sales@hms-networks.com
HMS - China
Tel : +86 010 8532 3183
E-mail: cn-sales@hms-networks.com
HMS - France
Tel: +33 368 368 034 (Mulhouse ofce)
E-mail: fr-sales@hms-networks.com
HMS - Finland
Tel: +358 404 557 381
E-mail: sales@hms-networks.com
HMS - Germany
Tel: +49 721 989777-000
E-mail: ge-sales@hms-networks.com
HMS - India
Tel: +91 83800 66578
E-mail: in-sales@hms-networks.com
HMS - Italy
Tel : +39 039 59662 27
E-mail: it-sales@hms-networks.com
HMS - Japan
Tel: +81 45 478 5340
E-mail: jp-sales@hms-networks.com
HMS - Switzerland
Tel: +41 61 511342-0
E-mail: sales@hms-networks.ch
HMS - UK
Tel: +44 1926 405599
E-mail: uk-sales@hms-networks.com
HMS - United States
Tel: +1 312 829 0601
E-mail: us-sales@hms-networks.com